#!/usr/bin/python
#
# This file is part of Ansible
#
# Ansible is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# Ansible is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
#
from __future__ import absolute_import, division, print_function


__metaclass__ = type


DOCUMENTATION = """
module: eos_command
author: Peter Sprygada (@privateip)
short_description: Run arbitrary commands on an Arista EOS device
description:
- Sends an arbitrary set of commands to an EOS node and returns the results read from
  the device.  This module includes an argument that will cause the module to wait
  for a specific condition before returning or timing out if the condition is not
  met.
version_added: 1.0.0
notes:
- Tested against Arista EOS 4.24.6F
options:
  commands:
    description:
    - The commands to send to the remote EOS device. The
      resulting output from the command is returned.  If the I(wait_for) argument
      is provided, the module is not returned until the condition is satisfied or
      the number of I(retries) has been exceeded.
    - Commands may be represented either as simple strings or as dictionaries as described below.
      Refer to the Examples setion for some common uses.
    required: true
    type: list
    elements: raw
    suboptions:
      command:
        description:
        - The command to send to the remote network device.  The resulting output from
          the command is returned, unless I(sendonly) is set.
        required: true
        type: str
      output:
        description:
        - How the remote device should format the command response data.
        type: str
        choices: ["text", "json"]
      version:
        description:
        - Specifies the version of the JSON response returned when I(output=json).
        type: str
        choices: ["1", "latest"]
        default: "latest"
      prompt:
        description:
        - A single regex pattern or a sequence of patterns to evaluate the expected prompt
          from I(command).
        required: false
        type: list
        elements: str
      answer:
        description:
        - The answer to reply with if I(prompt) is matched. The value can be a single
          answer or a list of answer for multiple prompts. In case the command execution
          results in multiple prompts the sequence of the prompt and excepted answer should
          be in same order.
        required: false
        type: list
        elements: str
      sendonly:
        description:
        - The boolean value, that when set to true will send I(command) to the device
          but not wait for a result.
        type: bool
        default: false
        required: false
      newline:
        description:
        - The boolean value, that when set to false will send I(answer) to the device
          without a trailing newline.
        type: bool
        default: true
        required: false
      check_all:
        description:
        - By default if any one of the prompts mentioned in C(prompt) option is matched
          it won't check for other prompts. This boolean flag, that when set to I(True)
          will check for all the prompts mentioned in C(prompt) option in the given order.
          If the option is set to I(True) all the prompts should be received from remote
          host if not it will result in timeout.
        type: bool
        default: false
  wait_for:
    description:
    - Specifies what to evaluate from the output of the command and what conditionals
      to apply.  This argument will cause the task to wait for a particular conditional
      to be true before moving forward.   If the conditional is not true by the configured
      retries, the task fails. Note - With I(wait_for) the value in C(result['stdout'])
      can be accessed using C(result), that is to access C(result['stdout'][0]) use
      C(result[0]) See examples.
    type: list
    elements: str
    aliases:
    - waitfor
  match:
    description:
    - The I(match) argument is used in conjunction with the I(wait_for) argument to
      specify the match policy.  Valid values are C(all) or C(any).  If the value
      is set to C(all) then all conditionals in the I(wait_for) must be satisfied.  If
      the value is set to C(any) then only one of the values must be satisfied.
    type: str
    default: all
    choices:
    - any
    - all
  retries:
    description:
    - Specifies the number of retries a command should be tried before it is considered
      failed.  The command is run on the target device every retry and evaluated against
      the I(wait_for) conditionals.
    default: 10
    type: int
  interval:
    description:
    - Configures the interval in seconds to wait between retries of the command.  If
      the command does not pass the specified conditional, the interval indicates
      how to long to wait before trying the command again.
    default: 1
    type: int
"""

EXAMPLES = r"""
- name: run show version on remote devices
  arista.eos.eos_command:
    commands: show version

- name: run show version and check to see if output contains Arista
  arista.eos.eos_command:
    commands: show version
    wait_for: result[0] contains Arista

- name: run multiple commands on remote nodes
  arista.eos.eos_command:
    commands:
    - show version
    - show interfaces

- name: run multiple commands and evaluate the output
  arista.eos.eos_command:
    commands:
    - show version
    - show interfaces
    wait_for:
    - result[0] contains Arista
    - result[1] contains Loopback0

- name: run commands and specify the output format
  arista.eos.eos_command:
    commands:
    - command: show version
      output: json

- name: check whether the switch is in maintenance mode
  arista.eos.eos_command:
    commands: show maintenance
    wait_for: result[0] contains 'Under Maintenance'

- name: check whether the switch is in maintenance mode using json output
  arista.eos.eos_command:
    commands:
    - command: show maintenance
      output: json
    wait_for: result[0].units.System.state eq 'underMaintenance'

- name: check whether the switch is in maintenance, with 8 retries
    and 2 second interval between retries
  arista.eos.eos_command:
    commands: show maintenance
    wait_for: result[0]['units']['System']['state'] eq 'underMaintenance'
    interval: 2
    retries: 8

- name: run a command that requires a confirmation. Note that prompt
    takes regexes, and so strings containing characters like brackets
    need to be escaped.
  arista.eos.eos_command:
    commands:
    - command: reload power
      prompt: \[confirm\]
      answer: y
      newline: false
"""

RETURN = """
stdout:
  description: The set of responses from the commands
  returned: always apart from low level errors (such as action plugin)
  type: list
  sample: ['...', '...']
stdout_lines:
  description: The value of stdout split into a list
  returned: always apart from low level errors (such as action plugin)
  type: list
  sample: [['...', '...'], ['...'], ['...']]
failed_conditions:
  description: The list of conditionals that have failed
  returned: failed
  type: list
  sample: ['...', '...']
"""
import time

from ansible.module_utils._text import to_text
from ansible.module_utils.basic import AnsibleModule
from ansible_collections.ansible.netcommon.plugins.module_utils.network.common.parsing import (
    Conditional,
)
from ansible_collections.ansible.netcommon.plugins.module_utils.network.common.utils import (
    to_lines,
)

from ansible_collections.arista.eos.plugins.module_utils.network.eos.eos import (
    run_commands,
    transform_commands,
)


def parse_commands(module, warnings):
    commands = transform_commands(module)

    if module.check_mode:
        for item in list(commands):
            if not item["command"].startswith("show"):
                warnings.append(
                    "Only show commands are supported when using check mode, not "
                    "executing %s" % item["command"],
                )
                commands.remove(item)

    return commands


def to_cli(obj):
    cmd = obj["command"]
    if obj.get("output") == "json":
        cmd += " | json"
    return cmd


def main():
    """entry point for module execution"""
    argument_spec = dict(
        commands=dict(type="list", required=True, elements="raw"),
        wait_for=dict(type="list", aliases=["waitfor"], elements="str"),
        match=dict(default="all", choices=["all", "any"]),
        retries=dict(default=10, type="int"),
        interval=dict(default=1, type="int"),
    )

    module = AnsibleModule(
        argument_spec=argument_spec,
        supports_check_mode=True,
    )

    warnings = list()
    result = {"changed": False, "warnings": warnings}
    commands = parse_commands(module, warnings)
    wait_for = module.params["wait_for"] or list()

    try:
        conditionals = [Conditional(c) for c in wait_for]
    except AttributeError as exc:
        module.fail_json(msg=to_text(exc))

    retries = module.params["retries"]
    interval = module.params["interval"]
    match = module.params["match"]

    while retries > 0:
        responses = run_commands(module, commands)

        for item in list(conditionals):
            if item(responses):
                if match == "any":
                    conditionals = list()
                    break
                conditionals.remove(item)

        if not conditionals:
            break

        time.sleep(interval)
        retries -= 1

    if conditionals:
        failed_conditions = [item.raw for item in conditionals]
        msg = "One or more conditional statements have not been satisfied"
        module.fail_json(msg=msg, failed_conditions=failed_conditions)

    result.update(
        {"stdout": responses, "stdout_lines": list(to_lines(responses))},
    )

    module.exit_json(**result)


if __name__ == "__main__":
    main()