#!/usr/bin/python
# -*- coding: utf-8 -*-

# GNU General Public License v3.0+ (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)

from __future__ import absolute_import, division, print_function
__metaclass__ = type

ANSIBLE_METADATA = {'metadata_version': '1.1',
                    'status': ['preview'],
                    'supported_by': 'certified'}

DOCUMENTATION = r'''
---
module: ucs_vnic_template
short_description: Configures vNIC templates on Cisco UCS Manager
description:
- Configures vNIC templates on Cisco UCS Manager.
extends_documentation_fragment: cisco.ucs.ucs
options:
  state:
    description:
    - If C(present), will verify vNIC templates are present and will create if needed.
    - If C(absent), will verify vNIC templates are absent and will delete if needed.
    choices: [present, absent]
    default: present
  name:
    description:
    - The name of the vNIC template.
    - This name can be between 1 and 16 alphanumeric characters.
    - "You cannot use spaces or any special characters other than - (hyphen), \"_\" (underscore), : (colon), and . (period)."
    - You cannot change this name after the template is created.
    required: yes
  description:
    description:
    - A user-defined description of the vNIC template.
    - Enter up to 256 characters.
    - "You can use any characters or spaces except the following:"
    - "` (accent mark), \ (backslash), ^ (carat), \" (double quote), = (equal sign), > (greater than), < (less than), or ' (single quote)."
    aliases: [ descr ]
  fabric:
    description:
    - The Fabric ID field specifying the fabric interconnect associated with vNICs created from this template.
    - If you want fabric failover enabled on vNICs created from this template, use of of the following:"
    - "A-B to use Fabric A by default with failover enabled."
    - "B-A to use Fabric B by default with failover enabled."
    - "Do not enable vNIC fabric failover under the following circumstances:"
    - "- If the Cisco UCS domain is running in Ethernet switch mode. vNIC fabric failover is not supported in that mode."
    - "- If you plan to associate one or more vNICs created from this template to a server with an adapter that does not support fabric failover."
    choices: [A, B, A-B, B-A]
    default: A
  redundancy_type:
    description:
    - The Redundancy Type used for vNIC redundancy pairs during fabric failover.
    - "This can be one of the following:"
    - "primary — Creates configurations that can be shared with the Secondary template."
    - "secondary — All shared configurations are inherited from the Primary template."
    - "none - Legacy vNIC template behavior. Select this option if you do not want to use redundancy."
    choices: [none, primary, secondary]
    default: none
  peer_redundancy_template:
    description:
    - The Peer Redundancy Template.
    - The name of the vNIC template sharing a configuration with this template.
    - If the redundancy_type is primary, the name of the secondary template should be provided.
    - If the redundancy_type is secondary, the name of the primary template should be provided.
    - Secondary templates can only configure non-shared properties (name, description, and mac_pool).
    aliases: [ peer_redundancy_templ ]
  target:
    description:
    - The possible target for vNICs created from this template.
    - The target determines whether or not Cisco UCS Manager automatically creates a VM-FEX port profile with the appropriate settings for the vNIC template.
    - "This can be one of the following:"
    - "adapter — The vNICs apply to all adapters. No VM-FEX port profile is created if you choose this option."
    - "vm - The vNICs apply to all virtual machines. A VM-FEX port profile is created if you choose this option."
    default: adapter
  template_type:
    description:
    - The Template Type field.
    - "This can be one of the following:"
    - "initial-template — vNICs created from this template are not updated if the template changes."
    - "updating-template - vNICs created from this template are updated if the template changes."
    choices: [initial-template, updating-template]
    default: initial-template
  vlans_list:
    description:
    - List of VLANs used by the vNIC template.
    - "Each list element has the following suboptions:"
    - "= name"
    - "  The name of the VLAN (required)."
    - "- native"
    - "  Designates the VLAN as a native VLAN.  Only one VLAN in the list can be a native VLAN."
    - "  [choices: 'no', 'yes']"
    - "  [Default: 'no']"
    - "- state"
    - "  If present, will verify VLAN is present on template."
    - "  If absent, will verify VLAN is absent on template."
    - "  choices: [present, absent]"
    - "  default: present"
  cdn_source:
    description:
    - CDN Source field.
    - "This can be one of the following options:"
    - "vnic-name - Uses the vNIC template name of the vNIC instance as the CDN name. This is the default option."
    - "user-defined - Uses a user-defined CDN name for the vNIC template. If this option is chosen, cdn_name must also be provided."
    choices: [vnic-name, user-defined]
    default: vnic-name
  cdn_name:
    description:
    - CDN Name used when cdn_source is set to user-defined.
  mtu:
    description:
    - The MTU field.
    - The maximum transmission unit, or packet size, that vNICs created from this vNIC template should use.
    - Enter a string between '1500' and '9000'.
    - If the vNIC template has an associated QoS policy, the MTU specified here must be equal to or less than the MTU specified in the QoS system class.
    default: '1500'
  mac_pool:
    description:
    - The MAC address pool that vNICs created from this vNIC template should use.
  qos_policy:
    description:
    - The quality of service (QoS) policy that vNICs created from this vNIC template should use.
  network_control_policy:
    description:
    - The network control policy that vNICs created from this vNIC template should use.
  pin_group:
    description:
    - The LAN pin group that vNICs created from this vNIC template should use.
  stats_policy:
    description:
    - The statistics collection policy that vNICs created from this vNIC template should use.
    default: default
  org_dn:
    description:
    - Org dn (distinguished name)
    default: org-root
requirements:
- ucsmsdk
author:
- David Soper (@dsoper2)
- John McDonough (@movinalot)
- CiscoUcs (@CiscoUcs)
version_added: '2.5'
'''

EXAMPLES = r'''
- name: Configure vNIC template
  cisco.ucs.ucs_vnic_template:
    hostname: 172.16.143.150
    username: admin
    password: password
    name: vNIC-A
    fabric: A
    vlans_list:
    - name: default
      native: 'yes'

- name: Configure vNIC template with failover
  cisco.ucs.ucs_vnic_template:
    hostname: 172.16.143.150
    username: admin
    password: password
    name: vNIC-A-B
    fabric: A-B
    vlans_list:
    - name: default
      native: 'yes'
      state: present

- name: Remove vNIC template
  cisco.ucs.ucs_vnic_template:
    hostname: 172.16.143.150
    username: admin
    password: password
    name: vNIC-A
    state: absent

- name: Remove another vNIC template
  cisco.ucs.ucs_vnic_template:
    hostname: 172.16.143.150
    username: admin
    password: password
    name: vNIC-A-B
    state: absent

- name: Remove VLAN from template
  cisco.ucs.ucs_vnic_template:
    hostname: 172.16.143.150
    username: admin
    password: password
    name: vNIC-A-B
    fabric: A-B
    vlans_list:
    - name: default
      native: 'yes'
      state: absent
'''

RETURN = r'''
#
'''

from ansible.module_utils.basic import AnsibleModule
from ansible_collections.cisco.ucs.plugins.module_utils.ucs import UCSModule, ucs_argument_spec


def main():
    argument_spec = ucs_argument_spec
    argument_spec.update(
        org_dn=dict(type='str', default='org-root'),
        name=dict(type='str', required=True),
        description=dict(type='str', aliases=['descr'], default=''),
        fabric=dict(type='str', default='A', choices=['A', 'B', 'A-B', 'B-A']),
        redundancy_type=dict(type='str', default='none', choices=['none', 'primary', 'secondary']),
        peer_redundancy_template=dict(type='str', aliases=['peer_redundancy_templ'], default=''),
        target=dict(type='str', default='adapter', choices=['adapter', 'vm']),
        template_type=dict(type='str', default='initial-template', choices=['initial-template', 'updating-template']),
        vlans_list=dict(type='list'),
        cdn_source=dict(type='str', default='vnic-name', choices=['vnic-name', 'user-defined']),
        cdn_name=dict(type='str', default=''),
        mtu=dict(type='str', default='1500'),
        mac_pool=dict(type='str', default=''),
        qos_policy=dict(type='str', default=''),
        network_control_policy=dict(type='str', default=''),
        pin_group=dict(type='str', default=''),
        stats_policy=dict(type='str', default='default'),
        state=dict(type='str', default='present', choices=['present', 'absent']),
    )

    module = AnsibleModule(
        argument_spec,
        supports_check_mode=True,
        required_if=[
            ['cdn_source', 'user-defined', ['cdn_name']],
        ],
    )
    ucs = UCSModule(module)

    err = False

    # UCSModule creation above verifies ucsmsdk is present and exits on failure.  Additional imports are done below.
    from ucsmsdk.mometa.vnic.VnicLanConnTempl import VnicLanConnTempl
    from ucsmsdk.mometa.vnic.VnicEtherIf import VnicEtherIf

    changed = False
    try:
        mo_exists = False
        props_match = False
        # dn is <org_dn>/lan-conn-templ-<name>
        dn = module.params['org_dn'] + '/lan-conn-templ-' + module.params['name']

        mo = ucs.login_handle.query_dn(dn)
        if mo:
            mo_exists = True

        if module.params['state'] == 'absent':
            # mo must exist but all properties do not have to match
            if mo_exists:
                if not module.check_mode:
                    ucs.login_handle.remove_mo(mo)
                    ucs.login_handle.commit()
                changed = True
        else:
            # set default params for lists which can't be done in the argument_spec
            if module.params.get('vlans_list'):
                for vlan in module.params['vlans_list']:
                    if not vlan.get('native'):
                        vlan['native'] = 'no'
                    if not vlan.get('state'):
                        vlan['state'] = 'present'
            # for target 'adapter', change to internal UCS Manager spelling 'adaptor'
            if module.params['target'] == 'adapter':
                module.params['target'] = 'adaptor'
            if mo_exists:
                # check top-level mo props
                kwargs = dict(descr=module.params['description'])
                kwargs['switch_id'] = module.params['fabric']
                kwargs['redundancy_pair_type'] = module.params['redundancy_type']
                kwargs['peer_redundancy_templ_name'] = module.params['peer_redundancy_template']
                kwargs['ident_pool_name'] = module.params['mac_pool']
                # do not check shared props if this is a secondary template
                if module.params['redundancy_type'] != 'secondary':
                    kwargs['target'] = module.params['target']
                    kwargs['templ_type'] = module.params['template_type']
                    kwargs['cdn_source'] = module.params['cdn_source']
                    kwargs['admin_cdn_name'] = module.params['cdn_name']
                    kwargs['mtu'] = module.params['mtu']
                    kwargs['qos_policy_name'] = module.params['qos_policy']
                    kwargs['nw_ctrl_policy_name'] = module.params['network_control_policy']
                    kwargs['pin_to_group_name'] = module.params['pin_group']
                    kwargs['stats_policy_name'] = module.params['stats_policy']
                if mo.check_prop_match(**kwargs):
                    # top-level props match, check next level mo/props
                    if not module.params.get('vlans_list'):
                        props_match = True
                    else:
                        # check vlan props
                        for vlan in module.params['vlans_list']:
                            child_dn = dn + '/if-' + str(vlan['name'])
                            mo_1 = ucs.login_handle.query_dn(child_dn)
                            if vlan['state'] == 'absent':
                                if mo_1:
                                    props_match = False
                                    break
                            else:
                                if mo_1:
                                    kwargs = dict(default_net=vlan['native'])
                                    if mo_1.check_prop_match(**kwargs):
                                        props_match = True
                                else:
                                    props_match = False
                                    break

            if not props_match:
                if not module.check_mode:
                    # create if mo does not already exist
                    # secondary template only sets non shared props
                    if module.params['redundancy_type'] == 'secondary':
                        mo = VnicLanConnTempl(
                            parent_mo_or_dn=module.params['org_dn'],
                            name=module.params['name'],
                            descr=module.params['description'],
                            switch_id=module.params['fabric'],
                            redundancy_pair_type=module.params['redundancy_type'],
                            peer_redundancy_templ_name=module.params['peer_redundancy_template'],
                            ident_pool_name=module.params['mac_pool'],
                        )
                    else:
                        mo = VnicLanConnTempl(
                            parent_mo_or_dn=module.params['org_dn'],
                            name=module.params['name'],
                            descr=module.params['description'],
                            switch_id=module.params['fabric'],
                            redundancy_pair_type=module.params['redundancy_type'],
                            peer_redundancy_templ_name=module.params['peer_redundancy_template'],
                            target=module.params['target'],
                            templ_type=module.params['template_type'],
                            cdn_source=module.params['cdn_source'],
                            admin_cdn_name=module.params['cdn_name'],
                            mtu=module.params['mtu'],
                            ident_pool_name=module.params['mac_pool'],
                            qos_policy_name=module.params['qos_policy'],
                            nw_ctrl_policy_name=module.params['network_control_policy'],
                            pin_to_group_name=module.params['pin_group'],
                            stats_policy_name=module.params['stats_policy'],
                        )

                    if module.params.get('vlans_list'):
                        for vlan in module.params['vlans_list']:
                            if vlan['state'] == 'absent':
                                child_dn = dn + '/if-' + str(vlan['name'])
                                mo_1 = ucs.login_handle.query_dn(child_dn)
                                ucs.login_handle.remove_mo(mo_1)
                            else:
                                mo_1 = VnicEtherIf(
                                    parent_mo_or_dn=mo,
                                    name=str(vlan['name']),
                                    default_net=vlan['native'],
                                )

                    ucs.login_handle.add_mo(mo, True)
                    ucs.login_handle.commit()
                changed = True

    except Exception as e:
        err = True
        ucs.result['msg'] = "setup error: %s " % str(e)

    ucs.result['changed'] = changed
    if err:
        module.fail_json(**ucs.result)
    module.exit_json(**ucs.result)


if __name__ == '__main__':
    main()