| Server IP : 85.214.239.14 / Your IP : 3.136.19.136 Web Server : Apache/2.4.62 (Debian) System : Linux h2886529.stratoserver.net 4.9.0 #1 SMP Tue Jan 9 19:45:01 MSK 2024 x86_64 User : www-data ( 33) PHP Version : 7.4.18 Disable Function : pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_get_handler,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,pcntl_async_signals,pcntl_unshare, MySQL : OFF | cURL : OFF | WGET : ON | Perl : ON | Python : ON | Sudo : ON | Pkexec : OFF Directory : /proc/self/root/proc/2/root/proc/3/cwd/proc/2/root/usr/share/snmp/mibs/ |
Upload File : |
UCD-SNMP-MIB DEFINITIONS ::= BEGIN
-- Design notes:
--
-- The design of this mib may seem unusual in parts, as it was
-- designed for ease of numerical management routines.
--
-- In that light, most sub-sections of this mib have four common
-- numerical oid consistencies:
--
-- 2021.ID.1 : an integer index value. In scalers, this is always
-- of value 1. In tables it is a row index.
-- 2021.ID.2 : a name of the script, process, etc. that this row represents.
-- 2021.ID.100 : An error flag indicating if an error is present on
-- that row (a threshold value was crossed, etc).
-- 2021.ID.101 : An error string describing why the error flag is non-0.
--
-- These conventions enable managers to easy examine portions of the
-- mib by setting the ID to the sub-section they are interested in
-- monitoring, and then scanning the .100 value to check for an
-- error(s), and get a more specific error message from .101 for the
-- named check found in .2.
--
-- Row numbers between 2 and 100 are sub-section specific.
--
-- Mib sections utilizing the above conventions:
-- Tables: procTable, execTable, diskTable, loadTable
-- Scalers: memory, snmperrs
IMPORTS
OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY,
Integer32, Opaque, enterprises, Counter32, Unsigned32
FROM SNMPv2-SMI
CounterBasedGauge64
FROM HCNUM-TC
TEXTUAL-CONVENTION, DisplayString, TruthValue
FROM SNMPv2-TC;
ucdavis MODULE-IDENTITY
LAST-UPDATED "201606100000Z"
ORGANIZATION "University of California, Davis"
CONTACT-INFO
"This mib is no longer being maintained by the University of
California and is now in life-support-mode and being
maintained by the net-snmp project. The best place to write
for public questions about the net-snmp-coders mailing list
at net-snmp-coders@lists.sourceforge.net.
postal: Wes Hardaker
P.O. Box 382
Davis CA 95617
email: net-snmp-coders@lists.sourceforge.net
"
DESCRIPTION
"This file defines the private UCD SNMP MIB extensions."
REVISION "201606100000Z"
DESCRIPTION
"New 64-bit memory objects"
REVISION "201407310000Z"
DESCRIPTION
"New object for number of CPUs as counted by the agent"
REVISION "201105140000Z"
DESCRIPTION
"New objects for monitoring CPU Steal, Guest and Nice values"
REVISION "200901190000Z"
DESCRIPTION
"New 64-bit objects for monitoring large disk usage"
REVISION "200611220000Z"
DESCRIPTION
"Clarify behaviour of objects in the memory & systemStats groups
(including updated versions of malnamed mem*Text objects).
Define suitable TCs to describe error reporting/fix behaviour."
REVISION "200404070000Z"
DESCRIPTION
"Added ssCpuRawSoftIRQ for Linux (2.6) and forgotten raw swap counters."
REVISION "200209050000Z"
DESCRIPTION
"Deprecate the non-raw objects."
REVISION "200109200000Z"
DESCRIPTION
"Group to monitor log files"
REVISION "200101170000Z"
DESCRIPTION
"Added raw CPU and IO counters."
REVISION "9912090000Z"
DESCRIPTION
"SMIv2 version converted from older MIB definitions."
::= { enterprises 2021 }
-- Current UCD core mib table entries:
-- prTable OBJECT IDENTIFIER ::= { ucdavis 2 }
-- memory OBJECT IDENTIFIER ::= { ucdavis 4 }
-- extTable OBJECT IDENTIFIER ::= { ucdavis 8 }
-- diskTable OBJECT IDENTIFIER ::= { ucdavis 9 }
-- loadTable OBJECT IDENTIFIER ::= { ucdavis 10 }
-- systemStats OBJECT IDENTIFIER ::= { ucdavis 11 }
-- ucdDemoMIB OBJECT IDENTIFIER ::= { ucdavis 14 } - UCD-DEMO-MIB
-- fileTable OBJECT IDENTIFIER ::= { ucdavis 15 }
-- logMatch OBJECT IDENTIFIER ::= { ucdavis 16 }
-- version OBJECT IDENTIFIER ::= { ucdavis 100 }
-- snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 }
-- mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 }
-- Older mib table entries that were changed to new locations above:
-- processes OBJECT IDENTIFIER ::= { ucdavis 1 }
-- exec OBJECT IDENTIFIER ::= { ucdavis 3 }
-- disk OBJECT IDENTIFIER ::= { ucdavis 6 }
-- load OBJECT IDENTIFIER ::= { ucdavis 7 }
-- Never implemented and removed from the mib:
-- lockd OBJECT IDENTIFIER ::= { ucdavis 5 }
-- Branches for registering other UCD MIB modules:
ucdInternal OBJECT IDENTIFIER ::= { ucdavis 12 }
ucdExperimental OBJECT IDENTIFIER ::= { ucdavis 13 }
-- OID values assigned in the ucdExperimental branch:
-- ucdIpFwAccMIB OBJECT IDENTIFIER ::= { ucdExperimental 1 } - UCD-IPFWACC-MIB
-- ucdIpFilter OBJECT IDENTIFIER ::= { ucdExperimental 2 } - UCD-IPFILTER-MIB
-- wavelan OBJECT IDENTIFIER ::= { ucdExperimental 3 } - WL-MIB
-- ucdDlmodMIB OBJECT IDENTIFIER ::= { ucdExperimental 14 } - UCD-DLMOD-MIB
-- ucdDiskIOMIB OBJECT IDENTIFIER ::= { ucdExperimental 15 } - UCD-DISKIO-MIB
-- lmSensors OBJECT IDENTIFIER ::= { ucdExperimental 16 } - LM-SENSORS-MIB
-- These are the old returned values of the agent type.
-- originally returned to: .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0
-- Current versions of the agent return an equivalent OID from the netSnmpAgentOIDs
-- tree (defined in NET-SNMP-TC), which includes values for some additional O/Ss
ucdSnmpAgent OBJECT IDENTIFIER ::= { ucdavis 250 }
hpux9 OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 }
sunos4 OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 }
solaris OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 }
osf OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 }
ultrix OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 }
hpux10 OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 }
netbsd1 OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 }
freebsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 }
irix OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 }
linux OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 }
bsdi OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 }
openbsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 12 }
win32 OBJECT IDENTIFIER ::= { ucdSnmpAgent 13 } -- unlucky
hpux11 OBJECT IDENTIFIER ::= { ucdSnmpAgent 14 }
aix OBJECT IDENTIFIER ::= { ucdSnmpAgent 15 }
macosx OBJECT IDENTIFIER ::= { ucdSnmpAgent 16 }
dragonfly OBJECT IDENTIFIER ::= { ucdSnmpAgent 17 }
unknown OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 }
--
-- Define the Float Textual Convention
-- This definition was written by David Perkins.
--
Float ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A single precision floating-point number. The semantics
and encoding are identical for type 'single' defined in
IEEE Standard for Binary Floating-Point,
ANSI/IEEE Std 754-1985.
The value is restricted to the BER serialization of
the following ASN.1 type:
FLOATTYPE ::= [120] IMPLICIT FloatType
(note: the value 120 is the sum of '30'h and '48'h)
The BER serialization of the length for values of
this type must use the definite length, short
encoding form.
For example, the BER serialization of value 123
of type FLOATTYPE is '9f780442f60000'h. (The tag
is '9f78'h; the length is '04'h; and the value is
'42f60000'h.) The BER serialization of value
'9f780442f60000'h of data type Opaque is
'44079f780442f60000'h. (The tag is '44'h; the length
is '07'h; and the value is '9f780442f60000'h."
SYNTAX Opaque (SIZE (7))
UCDErrorFlag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a possible error condition"
SYNTAX INTEGER { noError(0), error(1) }
UCDErrorFix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a 'push-button' object, to invoke a suitable
configured action. Will always return 0 when read."
SYNTAX INTEGER { noError(0), runFix(1) }
--
-- Process table checks
--
prTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information on running
programs/daemons configured for monitoring in the
snmpd.conf file of the agent. Processes violating the
number of running processes required by the agent's
configuration file are flagged with numerical and
textual errors."
::= { ucdavis 2 }
prEntry OBJECT-TYPE
SYNTAX PrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a process and its statistics."
INDEX { prIndex }
::= { prTable 1 }
PrEntry ::= SEQUENCE {
prIndex Integer32,
prNames DisplayString,
prMin Integer32,
prMax Integer32,
prCount Integer32,
prErrorFlag UCDErrorFlag,
prErrMessage DisplayString,
prErrFix UCDErrorFix,
prErrFixCmd DisplayString
}
prIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference Index for each observed process."
::= { prEntry 1 }
prNames OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The process name we're counting/checking on."
::= { prEntry 2 }
prMin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of processes that should be
running. An error flag is generated if the number of
running processes is < the minimum."
::= { prEntry 3 }
prMax OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of processes that should be
running. An error flag is generated if the number of
running processes is > the maximum."
::= { prEntry 4 }
prCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current processes running with the name
in question."
::= { prEntry 5 }
prErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Error flag to indicate trouble with a process. It
goes to 1 if there is an error, 0 if no error."
::= { prEntry 100 }
prErrMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An error message describing the problem (if one exists)."
::= { prEntry 101 }
prErrFix OBJECT-TYPE
SYNTAX UCDErrorFix
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to one will try to fix the problem if
the agent has been configured with a script to call
to attempt to fix problems automatically using remote
snmp operations."
::= { prEntry 102 }
prErrFixCmd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The command that gets run when the prErrFix column is
set to 1."
::= { prEntry 103 }
extTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of extensible commands returning output and
result codes. These commands are configured via the
agent's snmpd.conf file."
::= { ucdavis 8 }
extEntry OBJECT-TYPE
SYNTAX ExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing an extensible script/program and its output."
INDEX { extIndex }
::= { extTable 1 }
ExtEntry ::= SEQUENCE {
extIndex Integer32,
extNames DisplayString,
extCommand DisplayString,
extResult Integer32,
extOutput DisplayString,
extErrFix UCDErrorFix,
extErrFixCmd DisplayString
}
extIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reference Index for extensible scripts. Simply an
integer row number."
::= { extEntry 1 }
extNames OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Short, one name description of the extensible command."
::= { extEntry 2 }
extCommand OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The command line to be executed."
::= { extEntry 3 }
extResult OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result code (exit status) from the executed command."
::= { extEntry 100 }
extOutput OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first line of output of the executed command."
::= { extEntry 101 }
extErrFix OBJECT-TYPE
SYNTAX UCDErrorFix
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this to one will try to fix the problem if
the agent has been configured with a script to call
to attempt to fix problems automatically using remote
snmp operations."
::= { extEntry 102 }
extErrFixCmd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The command that gets run when the extErrFix column is
set to 1."
::= { extEntry 103 }
--
-- Memory usage/watch reporting.
-- Not supported on all systems!
-- See agent/mibgroup/ucd_snmp.h to see if its loaded for your architecture.
--
memory OBJECT IDENTIFIER ::= { ucdavis 4 }
memIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Index. This should always return the integer 0."
::= { memory 1 }
memErrorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Name. This should always return the string 'swap'."
::= { memory 2 }
memTotalSwap OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of swap space configured for this host."
::= { memory 3 }
memAvailSwap OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of swap space currently unused or available."
::= { memory 4 }
memTotalReal OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real/physical memory installed
on this host."
::= { memory 5 }
memAvailReal OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of real/physical memory currently unused
or available."
::= { memory 6 }
memTotalSwapTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of swap space or virtual memory allocated
for text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of swap space or virtual memory."
::= { memory 7 }
memAvailSwapTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The amount of swap space or virtual memory currently
being used by text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of swap space or virtual memory.
Note that (despite the name), this value reports the
amount used, rather than the amount free or available
for use. For clarity, this object is being deprecated
in favour of 'memUsedSwapTXT(16)."
::= { memory 8 }
memTotalRealTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real/physical memory allocated
for text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of physical memory."
::= { memory 9 }
memAvailRealTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The amount of real/physical memory currently being
used by text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of physical memory.
Note that (despite the name), this value reports the
amount used, rather than the amount free or available
for use. For clarity, this object is being deprecated
in favour of 'memUsedRealTXT(17)."
::= { memory 10 }
memTotalFree OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of memory free or available for use on
this host. This value typically covers both real memory
and swap space or virtual memory."
::= { memory 11 }
memMinimumSwap OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of swap space expected to be kept
free or available during normal operation of this host.
If this value (as reported by 'memAvailSwap(4)') falls
below the specified level, then 'memSwapError(100)' will
be set to 1 and an error message made available via
'memSwapErrorMsg(101)'."
::= { memory 12 }
memShared OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real or virtual memory currently
allocated for use as shared memory.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 13 }
memBuffer OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real or virtual memory currently
allocated for use as memory buffers.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 14 }
memCached OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real or virtual memory currently
allocated for use as cached memory.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 15 }
memUsedSwapTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of swap space or virtual memory currently
being used by text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of swap space or virtual memory."
::= { memory 16 }
memUsedRealTXT OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of real/physical memory currently being
used by text pages on this host.
This object will not be implemented on hosts where the
underlying operating system does not distinguish text
pages from other uses of physical memory."
::= { memory 17 }
memTotalSwapX OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of swap space configured for this host."
::= { memory 18 }
memAvailSwapX OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of swap space currently unused or available."
::= { memory 19 }
memTotalRealX OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real/physical memory installed
on this host."
::= { memory 20 }
memAvailRealX OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of real/physical memory currently unused
or available."
::= { memory 21 }
memTotalFreeX OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of memory free or available for use on
this host. This value typically covers both real memory
and swap space or virtual memory."
::= { memory 22 }
memMinimumSwapX OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of swap space expected to be kept
free or available during normal operation of this host.
If this value (as reported by 'memAvailSwap(4)') falls
below the specified level, then 'memSwapError(100)' will
be set to 1 and an error message made available via
'memSwapErrorMsg(101)'."
::= { memory 23 }
memSharedX OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real or virtual memory currently
allocated for use as shared memory.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 24 }
memBufferX OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real or virtual memory currently
allocated for use as memory buffers.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 25 }
memCachedX OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of real or virtual memory currently
allocated for use as cached memory.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 26 }
memSysAvail OBJECT-TYPE
SYNTAX CounterBasedGauge64
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of available memory, which is an estimate
of how much memory is available for starting new applications,
without swapping.
This object will not be implemented on hosts where the
underlying operating system does not explicitly identify
memory as specifically reserved for this purpose."
::= { memory 27 }
memSwapError OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the amount of available swap space
(as reported by 'memAvailSwap(4)'), is less than the
desired minimum (specified by 'memMinimumSwap(12)')."
::= { memory 100 }
memSwapErrorMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes whether the amount of available swap space
(as reported by 'memAvailSwap(4)'), is less than the
desired minimum (specified by 'memMinimumSwap(12)')."
::= { memory 101 }
dskTable OBJECT-TYPE
SYNTAX SEQUENCE OF DskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Disk watching information. Partions to be watched
are configured by the snmpd.conf file of the agent."
::= { ucdavis 9 }
dskEntry OBJECT-TYPE
SYNTAX DskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a disk and its statistics."
INDEX { dskIndex }
::= { dskTable 1 }
DskEntry ::= SEQUENCE {
dskIndex Integer32,
dskPath DisplayString,
dskDevice DisplayString,
dskMinimum Integer32,
dskMinPercent Integer32,
dskTotal Integer32,
dskAvail Integer32,
dskUsed Integer32,
dskPercent Integer32,
dskPercentNode Integer32,
dskErrorFlag UCDErrorFlag,
dskErrorMsg DisplayString,
dskTotalLow Unsigned32,
dskTotalHigh Unsigned32,
dskAvailLow Unsigned32,
dskAvailHigh Unsigned32,
dskUsedLow Unsigned32,
dskUsedHigh Unsigned32
}
dskIndex OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Integer reference number (row number) for the disk mib."
::= { dskEntry 1 }
dskPath OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path where the disk is mounted."
::= { dskEntry 2 }
dskDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Path of the device for the partition"
::= { dskEntry 3 }
dskMinimum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum space required on the disk (in kBytes) before the
errors are triggered. Either this or dskMinPercent is
configured via the agent's snmpd.conf file."
::= { dskEntry 4 }
dskMinPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of minimum space required on the disk before the
errors are triggered. Either this or dskMinimum is
configured via the agent's snmpd.conf file."
::= { dskEntry 5 }
dskTotal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of the disk/partion (kBytes).
For large disks (>2Tb), this value will
latch at INT32_MAX (2147483647)."
::= { dskEntry 6 }
dskAvail OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Available space on the disk.
For large lightly-used disks (>2Tb), this
value will latch at INT32_MAX (2147483647)."
::= { dskEntry 7 }
dskUsed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used space on the disk.
For large heavily-used disks (>2Tb), this
value will latch at INT32_MAX (2147483647)."
::= { dskEntry 8 }
dskPercent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of space used on disk"
::= { dskEntry 9 }
dskPercentNode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of inodes used on disk"
::= { dskEntry 10 }
dskTotalLow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of the disk/partion (kBytes).
Together with dskTotalHigh composes 64-bit number."
::= { dskEntry 11 }
dskTotalHigh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total size of the disk/partion (kBytes).
Together with dskTotalLow composes 64-bit number."
::= { dskEntry 12 }
dskAvailLow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Available space on the disk (kBytes).
Together with dskAvailHigh composes 64-bit number."
::= { dskEntry 13 }
dskAvailHigh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Available space on the disk (kBytes).
Together with dskAvailLow composes 64-bit number."
::= { dskEntry 14 }
dskUsedLow OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used space on the disk (kBytes).
Together with dskUsedHigh composes 64-bit number."
::= { dskEntry 15 }
dskUsedHigh OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Used space on the disk (kBytes).
Together with dskUsedLow composes 64-bit number."
::= { dskEntry 16 }
dskErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error flag signaling that the disk or partition is under
the minimum required space configured for it."
::= { dskEntry 100 }
dskErrorMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A text description providing a warning and the space left
on the disk."
::= { dskEntry 101 }
laTable OBJECT-TYPE
SYNTAX SEQUENCE OF LaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Load average information."
::= { ucdavis 10 }
laEntry OBJECT-TYPE
SYNTAX LaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a load average and its values."
INDEX { laIndex }
::= { laTable 1 }
LaEntry ::= SEQUENCE {
laIndex Integer32,
laNames DisplayString,
laLoad DisplayString,
laConfig DisplayString,
laLoadInt Integer32,
laLoadFloat Float,
laErrorFlag UCDErrorFlag,
laErrMessage DisplayString
}
laIndex OBJECT-TYPE
SYNTAX Integer32 (0..3)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"reference index/row number for each observed loadave."
::= { laEntry 1 }
laNames OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of loadave names we're watching."
::= { laEntry 2 }
laLoad OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1,5 and 15 minute load averages (one per row)."
::= { laEntry 3 }
laConfig OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The watch point for load-averages to signal an
error. If the load averages rises above this value,
the laErrorFlag below is set."
::= { laEntry 4 }
laLoadInt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1,5 and 15 minute load averages as an integer.
This is computed by taking the floating point
loadaverage value and multiplying by 100, then
converting the value to an integer."
::= { laEntry 5 }
laLoadFloat OBJECT-TYPE
SYNTAX Float
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1,5 and 15 minute load averages as an opaquely
wrapped floating point number."
::= { laEntry 6 }
laErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Error flag to indicate the load-average has crossed
its threshold value defined in the snmpd.conf file.
It is set to 1 if the threshold is crossed, 0 otherwise."
::= { laEntry 100 }
laErrMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An error message describing the load-average and its
surpased watch-point value."
::= { laEntry 101 }
version OBJECT IDENTIFIER ::= { ucdavis 100 }
versionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index to mib (always 0)"
::= { version 1 }
versionTag OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"CVS tag keyword"
::= { version 2 }
versionDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date string from RCS keyword"
::= { version 3 }
versionCDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date string from ctime() "
::= { version 4 }
versionIdent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Id string from RCS keyword"
::= { version 5 }
versionConfigureOptions OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Options passed to the configure script when this agent was built."
::= { version 6 }
versionClearCache OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to clear the exec cache, if enabled"
::= { version 10 }
versionUpdateConfig OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to read-read the config file(s)."
::= { version 11 }
versionRestartAgent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to restart the agent."
::= { version 12 }
versionSavePersistentData OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to force the agent to save it's persistent data immediately."
::= { version 13 }
versionDoDebugging OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set to 1 to turn debugging statements on in the agent or 0
to turn it off."
::= { version 20 }
snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 }
snmperrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Index for snmperrs (always 0)."
::= { snmperrs 1 }
snmperrNames OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"snmp"
::= { snmperrs 2 }
snmperrErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Error flag to indicate trouble with the agent. It
goes to 1 if there is an error, 0 if no error."
::= { snmperrs 100 }
snmperrErrMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An error message describing the problem (if one exists)."
::= { snmperrs 101 }
mrTable OBJECT-TYPE
SYNTAX SEQUENCE OF MrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table displaying all the oid's registered by mib modules in
the agent. Since the agent is modular in nature, this lists
each module's OID it is responsible for and the name of the module"
::= { ucdavis 102 }
mrEntry OBJECT-TYPE
SYNTAX MrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing a registered mib oid."
INDEX { IMPLIED mrIndex }
::= { mrTable 1 }
MrEntry ::= SEQUENCE {
mrIndex OBJECT IDENTIFIER,
mrModuleName DisplayString
}
mrIndex OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The registry slot of a mibmodule."
::= { mrEntry 1 }
mrModuleName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The module name that registered this OID."
::= { mrEntry 2 }
systemStats OBJECT IDENTIFIER ::= { ucdavis 11 }
ssIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Index. This should always return the integer 1."
::= { systemStats 1 }
ssErrorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bogus Name. This should always return the string 'systemStats'."
::= { systemStats 2 }
ssSwapIn OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average amount of memory swapped in from disk,
calculated over the last minute."
::= { systemStats 3 }
ssSwapOut OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average amount of memory swapped out to disk,
calculated over the last minute."
::= { systemStats 4 }
ssIOSent OBJECT-TYPE
SYNTAX Integer32
UNITS "blocks/s"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average amount of data written to disk or other
block device, calculated over the last minute.
This object has been deprecated in favour of
'ssIORawSent(57)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 5 }
ssIOReceive OBJECT-TYPE
SYNTAX Integer32
UNITS "blocks/s"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average amount of data read from disk or other
block device, calculated over the last minute.
This object has been deprecated in favour of
'ssIORawReceived(58)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 6 }
ssSysInterrupts OBJECT-TYPE
SYNTAX Integer32
UNITS "interrupts/s"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average rate of interrupts processed (including
the clock) calculated over the last minute.
This object has been deprecated in favour of
'ssRawInterrupts(59)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 7 }
ssSysContext OBJECT-TYPE
SYNTAX Integer32
UNITS "switches/s"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average rate of context switches,
calculated over the last minute.
This object has been deprecated in favour of
'ssRawContext(60)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 8 }
ssCpuUser OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The percentage of CPU time spent processing
user-level code, calculated over the last minute.
This object has been deprecated in favour of
'ssCpuRawUser(50)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 9 }
ssCpuSystem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The percentage of CPU time spent processing
system-level code, calculated over the last minute.
This object has been deprecated in favour of
'ssCpuRawSystem(52)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 10 }
ssCpuIdle OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The percentage of processor time spent idle,
calculated over the last minute.
This object has been deprecated in favour of
'ssCpuRawIdle(53)', which can be used to calculate
the same metric, but over any desired time period."
::= { systemStats 11 }
-- The agent only implements those of the following counters that the
-- kernel supports! Don't expect all to be present.
ssCpuRawUser OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing user-level code.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 50 }
ssCpuRawNice OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing reduced-priority code.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 51 }
ssCpuRawSystem OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing system-level code.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors).
This object may sometimes be implemented as the
combination of the 'ssCpuRawWait(54)' and
'ssCpuRawKernel(55)' counters, so care must be
taken when summing the overall raw counters."
::= { systemStats 52 }
ssCpuRawIdle OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
idle.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 53 }
ssCpuRawWait OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
waiting for IO.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric. This time may also be
included within the 'ssCpuRawSystem(52)' counter.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 54 }
ssCpuRawKernel OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing kernel-level code.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric. This time may also be
included within the 'ssCpuRawSystem(52)' counter.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 55 }
ssCpuRawInterrupt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing hardware interrupts.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 56 }
ssIORawSent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of blocks sent to a block device"
::= { systemStats 57 }
ssIORawReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of blocks received from a block device"
::= { systemStats 58 }
ssRawInterrupts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of interrupts processed"
::= { systemStats 59 }
ssRawContexts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of context switches"
::= { systemStats 60 }
ssCpuRawSoftIRQ OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
processing software interrupts.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 61 }
ssRawSwapIn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of blocks swapped in"
::= { systemStats 62 }
ssRawSwapOut OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of blocks swapped out"
::= { systemStats 63 }
ssCpuRawSteal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
by the hypervisor code to run other VMs even
though the CPU in the current VM had something runnable.
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 64 }
ssCpuRawGuest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
by the CPU to run a virtual CPU (guest).
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 65 }
ssCpuRawGuestNice OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of 'ticks' (typically 1/100s) spent
by the CPU to run a niced virtual CPU (guest).
This object will not be implemented on hosts where
the underlying operating system does not measure
this particular CPU metric.
On a multi-processor system, the 'ssCpuRaw*'
counters are cumulative over all CPUs, so their
sum will typically be N*100 (for N processors)."
::= { systemStats 66 }
ssCpuNumCpus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of processors, as counted by the agent.
This object's value may be useful in the management
of certain operating systems where notions such as
load average do not take into account the number of
processors in the system.
For other objects in the systemStats group whose
descriptions refer to 'N processors', this object's
value is N."
::= { systemStats 67 }
-- possibly used in the future:
--
-- ssErrorFlag OBJECT-TYPE
-- SYNTAX UCDErrorFlag
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Error flag."
-- ::= { systemStats 100 }
--
-- ssErrMessage OBJECT-TYPE
-- SYNTAX DisplayString
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Error message describing the errorflag condition."
-- ::= { systemStats 101 }
ucdTraps OBJECT IDENTIFIER ::= { ucdavis 251 }
ucdStart NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap could in principle be sent when the agent start"
::= { ucdTraps 1 }
ucdShutdown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This trap is sent when the agent terminates"
::= { ucdTraps 2 }
--
-- File Table: monitor a list of files to check for a maximum size.
--
fileTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of monitored files."
::= { ucdavis 15 }
fileEntry OBJECT-TYPE
SYNTAX FileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of file"
INDEX { fileIndex }
::= { fileTable 1 }
FileEntry ::= SEQUENCE {
fileIndex Integer32,
fileName DisplayString,
fileSize Integer32,
fileMax Integer32,
fileErrorFlag UCDErrorFlag,
fileErrorMsg DisplayString
}
fileIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of file"
::= { fileEntry 1 }
fileName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Filename"
::= { fileEntry 2 }
fileSize OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Size of file (kB)"
::= { fileEntry 3 }
fileMax OBJECT-TYPE
SYNTAX Integer32
UNITS "kB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Limit of filesize (kB)"
::= { fileEntry 4 }
fileErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Limit exceeded flag"
::= { fileEntry 100 }
fileErrorMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Filesize error message"
::= { fileEntry 101 }
logMatch OBJECT IDENTIFIER ::= { ucdavis 16 }
logMatchMaxEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of logmatch entries
this snmpd daemon can support."
::= { logMatch 1 }
logMatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF LogMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of monitored files."
::= { logMatch 2 }
logMatchEntry OBJECT-TYPE
SYNTAX LogMatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of file"
INDEX { logMatchIndex }
::= { logMatchTable 1 }
LogMatchEntry ::=
SEQUENCE {
logMatchIndex
Integer32,
logMatchName
DisplayString,
logMatchFilename
DisplayString,
logMatchRegEx
DisplayString,
logMatchGlobalCounter
Counter32,
logMatchGlobalCount
Integer32,
logMatchCurrentCounter
Counter32,
logMatchCurrentCount
Integer32,
logMatchCounter
Counter32,
logMatchCount
Integer32,
logMatchCycle
Integer32,
logMatchErrorFlag
UCDErrorFlag,
logMatchRegExCompilation
DisplayString
}
logMatchIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of logmatch"
::= { logMatchEntry 1 }
logMatchName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"logmatch instance name"
::= { logMatchEntry 2 }
logMatchFilename OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"filename to be logmatched"
::= { logMatchEntry 3 }
logMatchRegEx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"regular expression"
::= { logMatchEntry 4 }
logMatchGlobalCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"global count of matches"
::= { logMatchEntry 5 }
logMatchGlobalCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { logMatchEntry 6 }
logMatchCurrentCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Regex match counter. This counter will
be reset with each logfile rotation."
::= { logMatchEntry 7 }
logMatchCurrentCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { logMatchEntry 8 }
logMatchCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Regex match counter. This counter will
be reset with each read"
::= { logMatchEntry 9 }
logMatchCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { logMatchEntry 10 }
logMatchCycle OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"time between updates (if not queried) in seconds"
::= { logMatchEntry 11 }
logMatchErrorFlag OBJECT-TYPE
SYNTAX UCDErrorFlag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"errorflag: is this line configured correctly?"
::= { logMatchEntry 100 }
logMatchRegExCompilation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"message of regex precompilation"
::= { logMatchEntry 101 }
END