| Server IP : 85.214.239.14 / Your IP : 3.147.46.174 Web Server : Apache/2.4.62 (Debian) System : Linux h2886529.stratoserver.net 4.9.0 #1 SMP Tue Jan 9 19:45:01 MSK 2024 x86_64 User : www-data ( 33) PHP Version : 7.4.18 Disable Function : pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_get_handler,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,pcntl_async_signals,pcntl_unshare, MySQL : OFF | cURL : OFF | WGET : ON | Perl : ON | Python : ON | Sudo : ON | Pkexec : OFF Directory : /proc/2/root/usr/share/perl5/Amavis/In/ |
Upload File : |
# SPDX-License-Identifier: GPL-2.0-or-later
package Amavis::In::SMTP;
use strict;
use re 'taint';
use warnings;
use warnings FATAL => qw(utf8 void);
no warnings 'uninitialized';
# use warnings 'extra'; no warnings 'experimental::re_strict'; use re 'strict';
BEGIN {
require Exporter;
use vars qw(@ISA @EXPORT @EXPORT_OK %EXPORT_TAGS $VERSION);
$VERSION = '2.412';
@ISA = qw(Exporter);
}
use Errno qw(ENOENT EACCES EINTR EAGAIN);
use MIME::Base64;
use Time::HiRes ();
#use IO::Socket::SSL;
use Amavis::Conf qw(:platform :confvars c cr ca);
use Amavis::In::Connection;
use Amavis::In::Message;
use Amavis::Lookup qw(lookup lookup2);
use Amavis::Lookup::IP qw(lookup_ip_acl normalize_ip_addr);
use Amavis::rfc2821_2822_Tools;
use Amavis::TempDir;
use Amavis::Timing qw(section_time);
use Amavis::Util qw(ll do_log do_log_safe untaint
dump_captured_log log_capture_enabled
am_id new_am_id snmp_counters_init
orcpt_decode xtext_decode safe_encode_utf8_inplace
idn_to_ascii sanitize_str add_entropy
debug_oneshot waiting_for_client prolong_timer
switch_to_my_time switch_to_client_time
setting_by_given_contents_category);
BEGIN { # due to dynamic loading runs only after config files have been read
# for compatibility with 2.10 or earlier:
$smtpd_tls_server_options{SSL_key_file} = $smtpd_tls_key_file
if !exists $smtpd_tls_server_options{SSL_key_file} &&
defined $smtpd_tls_key_file;
$smtpd_tls_server_options{SSL_cert_file} = $smtpd_tls_cert_file
if !exists $smtpd_tls_server_options{SSL_cert_file} &&
defined $smtpd_tls_cert_file;
my $tls_security_level = c('tls_security_level_in');
$tls_security_level = 0 if !defined($tls_security_level) ||
lc($tls_security_level) eq 'none';
if ($tls_security_level) {
( defined $smtpd_tls_server_options{SSL_cert_file} &&
$smtpd_tls_server_options{SSL_cert_file} ne ''
) or die '$tls_security_level is enabled '.
'but $smtpd_tls_server_options{SSL_cert_file} is not provided'."\n";
( defined $smtpd_tls_server_options{SSL_key_file} &&
$smtpd_tls_server_options{SSL_key_file} ne ''
) or die '$tls_security_level is enabled '.
'but $smtpd_tls_server_options{SSL_key_file} is not provided'."\n";
}
1;
}
sub new($) {
my $class = $_[0];
my $self = bless {}, $class;
undef $self->{sock}; # SMTP socket
$self->{proto} = undef; # SMTP / ((ESMTP / LMTP) (A | S | SA)? )
$self->{smtp_outbuf} = undef; # SMTP responses buffer for PIPELINING
undef $self->{pipelining}; # may we buffer responses?
undef $self->{session_closed_normally}; # closed properly with QUIT
$self->{within_data_transfer} = 0;
$self->{smtp_inpbuf} = ''; # SMTP input buffer
$self->{tempdir} = Amavis::TempDir->new; # TempDir object
$self;
}
sub DESTROY {
my $self = $_[0];
local($@,$!,$_); my $myactualpid = $$;
eval {
if (defined($my_pid) && $myactualpid != $my_pid) {
do_log(5,"Skip closing SMTP session in a clone [%s] (born as [%s])",
$myactualpid, $my_pid);
} elsif (ref($self->{sock}) && ! $self->{session_closed_normally}) {
my $msg = "421 4.3.2 Service shutting down, closing channel";
$msg .= ", during waiting for input from client" if waiting_for_client();
$msg .= ", sig: " .
join(',', keys %Amavisd::got_signals) if %Amavisd::got_signals;
$self->smtp_resp(1,$msg);
}
1;
} or do {
my $eval_stat = $@ ne '' ? $@ : "errno=$!";
do_log_safe(1,"SMTP shutdown: %s", $eval_stat);
};
}
sub readline {
my($self, $timeout) = @_;
my($rout,$eout,$rin,$ein);
my $ifh = $self->{sock};
for (;;) {
local($1);
return $1 if $self->{smtp_inpbuf} =~ s/^(.*?\015\012)//s;
# if (defined $timeout) {
# if (!defined $rin) {
# $rin = $ein = ''; vec($rin, fileno $self->{sock}, 1) = 1; $ein = $rin;
# }
# my($nfound,$timeleft) =
# select($rout=$rin, undef, $eout=$ein, $timeout);
# defined $nfound && $nfound >= 0
# or die "Select failed: ".
# (!$self->{ssl_active} ? $! : $ifh->errstr.", $!");
# if (!$nfound) {
# do_log(2, 'smtp readline: timed out, %s s', $timeout);
# $timeout = undef; next; # carry on as usual
# }
# }
my $nbytes = $ifh->sysread($self->{smtp_inpbuf}, 16384,
length($self->{smtp_inpbuf}));
if ($nbytes) {
ll(5) && do_log(5, 'smtp readline: read %d bytes, new size: %d',
$nbytes, length($self->{smtp_inpbuf}));
} elsif (defined $nbytes) { # defined but zero
do_log(5, 'smtp readline: EOF');
$! = 0; # eof, no error
last;
} elsif ($! == EAGAIN || $! == EINTR) {
do_log(5, 'smtp readline: interrupted: %s',
!$self->{ssl_active} ? $! : $ifh->errstr.", $!");
# retry
} else {
do_log(5, 'smtp readline: error: %s',
!$self->{ssl_active} ? $! : $ifh->errstr.", $!");
last;
}
}
undef;
}
# Efficiently copy mail text from an SMTP socket to a file, converting
# CRLF to a local filesystem newlines \n, and handling dot-destuffing.
# Should be called just after the DATA command has been responded to,
# stops reading at a CRLF DOT CRLF or eof. Does not report stuffing errors.
#
# Our current statistics (Q4 2011) shows that 80 % of messages are below
# 30.000 bytes, and 90 % of messages are below 100.000 bytes in size.
#
sub copy_smtp_data {
my($self, $ofh, $out_str_ref, $size_limit) = @_;
my $ifh = $self->{sock};
my $buff = $self->{smtp_inpbuf}; # work with a local copy
$$out_str_ref = '' if ref $out_str_ref;
# assumes to be called right after a DATA<CR><LF>
my $eof = 0; my $at_the_beginning = 1;
my $size = 0; my $oversized = 0;
my($errno,$nreads,$j);
my $smtpd_t_o = c('smtpd_timeout');
while (!$eof) {
# alarm should apply per-line, but we are dealing with whole chunks here
alarm($smtpd_t_o);
$nreads = $ifh->sysread($buff, 65536, length $buff);
if ($nreads) {
ll(5) && do_log(5, "smtp copy: read %d bytes into buffer, new size: %d",
$nreads, length($buff));
} elsif (defined $nreads) {
$eof = 1;
do_log(5, "smtp copy: EOF");
} else {
$eof = 1;
$errno = !$self->{ssl_active} ? $! : $ifh->errstr.", $!";
do_log(5, "smtp copy: error: %s", $errno);
}
if ($at_the_beginning && substr($buff,0,3) eq ".\015\012") {
# a preceding \015\012 is implied, although no longer in the buffer
substr($buff,0,3) = '';
$self->{within_data_transfer} = 0;
last;
} elsif ( ($j=index($buff,"\015\012.\015\012")) >= 0 ) { # last chunk
my $carry = substr($buff,$j+5); # often empty
substr($buff,$j+2) = ''; # ditch the dot and the rest
$size += length($buff);
if (!$oversized) {
$buff =~ s/\015\012\.?/\n/gs;
# the last chunk is allowed to overshoot the 'small mail' limit
$$out_str_ref .= $buff if $out_str_ref;
if ($ofh) {
my $nwrites;
for (my $ofs = 0; $ofs < length($buff); $ofs += $nwrites) {
$nwrites = syswrite($ofh, $buff, length($buff)-$ofs, $ofs);
defined $nwrites or die "Error writing to mail file: $!";
}
}
if ($size_limit && $size > $size_limit) {
do_log(1,"Message size exceeded %d B", $size_limit);
$oversized = 1;
}
}
$buff = $carry;
$self->{within_data_transfer} = 0;
last;
}
my $carry = '';
if ($eof) {
# flush whatever is in the buffer, no more data coming
} elsif ($at_the_beginning &&
($buff eq ".\015" || $buff eq '.' || $buff eq '')) {
$carry = $buff; $buff = '';
} elsif (substr($buff,-4,4) eq "\015\012.\015") {
substr($buff,-4,4) = ''; $carry = "\015\012.\015";
} elsif (substr($buff,-3,3) eq "\015\012.") {
substr($buff,-3,3) = ''; $carry = "\015\012.";
} elsif (substr($buff,-2,2) eq "\015\012") {
substr($buff,-2,2) = ''; $carry = "\015\012";
} elsif (substr($buff,-1,1) eq "\015") {
substr($buff,-1,1) = ''; $carry = "\015";
}
if ($buff ne '') {
$at_the_beginning = 0;
# message size is defined in RFC 1870, includes CRLF but no stuffed dots
# NOTE: we overshoot here by the number of stuffed dots, for performance;
# the message size will be finely adjusted in get_body_digest()
$size += length($buff);
if (!$oversized) {
# The RFC 5321 is quite clear, leading "." characters in
# SMTP are stripped regardless of the following character.
# Some MTAs only trim "." when the next character is also
# a ".", but this violates the RFC.
$buff =~ s/\015\012\.?/\n/gs; # quite fast, but still a bottleneck
if (!$out_str_ref) {
# not writing to memory
} elsif (length($$out_str_ref) < 100*1024) { # 100 KiB 'small mail'
$$out_str_ref .= $buff;
} else { # large mail, hand over writing to a file
# my $nwrites;
# for (my $ofs = 0; $ofs < length($$out_str_ref); $ofs += $nwrites) {
# $nwrites = syswrite($ofh, $$out_str_ref,
# length($$out_str_ref)-$ofs, $ofs);
# defined $nwrites or die "Error writing to mail file: $!";
# }
$$out_str_ref = '';
$out_str_ref = undef;
}
if ($ofh) {
my $nwrites;
for (my $ofs = 0; $ofs < length($buff); $ofs += $nwrites) {
$nwrites = syswrite($ofh, $buff, length($buff)-$ofs, $ofs);
defined $nwrites or die "Error writing to mail file: $!";
}
}
if ($size_limit && $size > $size_limit) {
do_log(1,"Message size exceeded %d B, ".
"skipping further input", $size_limit);
my $trunc_str = "\n***TRUNCATED***\n";
$$out_str_ref .= $trunc_str if $out_str_ref;
if ($ofh) {
my $nwrites = syswrite($ofh, $trunc_str);
defined $nwrites or die "Error writing to mail file: $!";
}
$oversized = 1;
}
}
}
$buff = $carry;
}
do_log(5, "smtp copy: %d bytes still buffered at end", length($buff));
$self->{smtp_inpbuf} = $buff; # put a local copy back into object
!$self->{within_data_transfer} or die "Connection broken during DATA: ".
(!$self->{ssl_active} ? $! : $ifh->errstr.", $!");
# return a message size and an indication of exceeded size limit
($size,$oversized);
}
sub preserve_evidence { # preserve temporary files etc in case of trouble
my $self = shift;
!$self->{tempdir} ? undef : $self->{tempdir}->preserve(@_);
}
sub authenticate($$$) {
my($state,$auth_mech,$auth_resp) = @_;
my($result,$newchallenge);
if ($auth_mech eq 'ANONYMOUS') { # RFC 2245
$result = [$auth_resp,undef];
} elsif ($auth_mech eq 'PLAIN') { # RFC 2595, "user\0authname\0pass"
if (!defined($auth_resp)) { $newchallenge = '' }
else { $result = [ (split(/\000/,$auth_resp,-1))[0,2] ] }
} elsif ($auth_mech eq 'LOGIN' && !defined $state) {
$newchallenge = 'Username:'; $state = [];
} elsif ($auth_mech eq 'LOGIN' && @$state==0) {
push(@$state, $auth_resp); $newchallenge = 'Password:';
} elsif ($auth_mech eq 'LOGIN' && @$state==1) {
push(@$state, $auth_resp); $result = $state;
} # CRAM-MD5:RFC 2195, DIGEST-MD5:RFC 2831
($state,$result,$newchallenge);
}
# Parse the "PROXY protocol header", which is a block of connection info
# the connection initiator prepends at the beginning of a connection.
# Recognizes the PROXY protocol Version 1 (V 2 is not supported here).
# http://www.haproxy.org/download/1.5/doc/proxy-protocol.txt
#
sub haproxy_protocol_parse($) {
local($_) = $_[0]; # a "PROXY protocol header"
my($proto, $src_addr, $dst_addr, $src_port, $dst_port);
local($1,$2,$3,$4,$5);
if (/^PROXY\ (UNKNOWN)/) {
$proto = $1; # receiver must ignore anything presented before the CRLF
} elsif (/^PROXY\ ((?-i)TCP4)\ ((?:\d{1,3}\.){3}\d{1,3})
\ ((?:\d{1,3}\.){3}\d{1,3})
\ (\d{1,5})\ (\d{1,5})\x0D\x0A\z/xs) {
($proto, $src_addr, $dst_addr, $src_port, $dst_port) = ($1,$2,$3,$4,$5);
} elsif (/^PROXY\ ((?-i)TCP6)\ ([0-9a-f]{0,4} (?: : [0-9a-f]{0,4}){2,7})
\ ([0-9a-f]{0,4} (?: : [0-9a-f]{0,4}){2,7})
\ (\d{1,5})\ (\d{1,5})\x0D\x0A\z/xsi) {
($proto, $src_addr, $dst_addr, $src_port, $dst_port) = ($1,$2,$3,$4,$5);
}
return ($proto) if $proto !~ /^TCP[46]\z/;
return if $src_port && $src_port =~ /^0/; # leading zeroes not allowed
return if $dst_port && $dst_port =~ /^0/;
$src_port = 0+$src_port; $dst_port = 0+$dst_port; # turn to numeric
return if $src_port > 65535 || $dst_port > 65535;
($proto, $src_addr, $dst_addr, $src_port, $dst_port);
}
# process the "PROXY protocol header" and pretend the claimed connection
#
sub haproxy_apply($$) {
my($conn, $line) = @_;
if (defined $line) {
ll(4) && do_log(4, 'HAProxy: < %s', $line);
my($proto, $src_addr, $dst_addr, $src_port, $dst_port) =
haproxy_protocol_parse($line);
if (!defined $src_addr || !defined $dst_addr ||
!$src_port || !$dst_port) {
do_log(0, "HAProxy: PROXY protocol header expected, got: %s", $line);
die "HAProxy: a PROXY protocol header expected";
} elsif (!Amavis::access_is_allowed(undef, $src_addr, $src_port,
$dst_addr, $dst_port)) {
do_log(0, "HAProxy, access denied: %s [%s]:%d -> [%s]:%d",
$proto, $src_addr, $src_port, $dst_addr, $dst_port);
die "HAProxy: access from client $src_addr denied\n";
} else {
if (ll(3)) {
do_log(3,
"HAProxy: accepted: (client) [%s]:%d -> [%s]:%d (HA Proxy/server)",
$src_addr, $src_port, $dst_addr, $dst_port);
do_log(3,
"HAProxy: (HA Proxy/initiator) [%s]:%d -> [%s]:%d (me/target)",
$conn->client_ip||'x', $conn->client_port||0,
$conn->socket_ip||'x', $conn->socket_port||0);
};
$conn->client_ip(untaint(normalize_ip_addr($src_addr)));
$conn->socket_ip(untaint(normalize_ip_addr($dst_addr)));
$conn->client_port(untaint($src_port));
$conn->socket_port(untaint($dst_port));
}
}
}
# Accept an SMTP or LMTP connect (which can do any number of transactions)
# and call content checking for each message received
#
sub process_smtp_request($$$$) {
my($self, $sock, $lmtp, $conn, $check_mail) = @_;
# $sock: connected socket from Net::Server
# $lmtp: greet as an LMTP server instead of (E)SMTP
# $conn: information about client connection
# $check_mail: subroutine ref to be called with file handle
my($msginfo, $authenticated, $auth_user, $auth_pass);
my(%announced_ehlo_keywords);
$self->{sock} = $sock;
$self->{pipelining} = 0; # may we buffer responses?
$self->{smtp_outbuf} = []; # SMTP responses buffer for PIPELINING
$self->{session_closed_normally} = 0; # closed properly with QUIT?
$self->{ssl_active} = 0; # session upgraded to SSL
my $tls_security_level = c('tls_security_level_in');
$tls_security_level = 0 if !defined($tls_security_level) ||
lc($tls_security_level) eq 'none';
my $myheloname;
# $myheloname = idn_to_ascii(c('myhostname'));
# $myheloname = 'localhost';
# $myheloname = '[127.0.0.1]';
my $sock_ip = $conn->socket_ip;
$myheloname = defined $sock_ip && $sock_ip ne '' ? "[$sock_ip]"
: '[localhost]';
new_am_id(undef, $Amavis::child_invocation_count, undef);
my $initial_am_id = 1;
my($sender_unq, $sender_quo, @recips, $got_rcpt);
my $max_recip_size_limit; # maximum of per-recipient message size limits
my($terminating,$aborting,$eof,$voluntary_exit); my(%xforward_args);
my $seq = 0;
my(%baseline_policy_bank) = %current_policy_bank;
$conn->appl_proto($self->{proto} = $lmtp ? 'LMTP' : 'SMTP');
my $final_oversized_destiny_all_pass = 1;
my $oversized_fd_map_ref =
setting_by_given_contents_category(CC_OVERSIZED,
cr('final_destiny_maps_by_ccat'));
my $oversized_lovers_map_ref =
setting_by_given_contents_category(CC_OVERSIZED,
cr('lovers_maps_by_ccat'));
# system-wide message size limit, if any
my $message_size_limit = c('smtpd_message_size_limit');
if ($enforce_smtpd_message_size_limit_64kb_min &&
$message_size_limit && $message_size_limit < 65536) {
$message_size_limit = 65536; # RFC 5321 requires at least 64k
}
if (c('haproxy_target_enabled')) {
Amavis::Timing::go_idle(4);
my $line; { local($/) = "\012"; $line = $self->readline }
Amavis::Timing::go_busy(5);
defined $line or die "Error reading, expected a PROXY header: $!";
haproxy_apply($conn, $line);
}
my $smtpd_greeting_banner_tmp = c('smtpd_greeting_banner');
$smtpd_greeting_banner_tmp =~
s{ \$ (?: \{ ([^\}]+) \} |
([a-zA-Z](?:[a-zA-Z0-9_-]*[a-zA-Z0-9])?\b) ) }
{ { 'helo-name' => $myheloname,
'myhostname' => idn_to_ascii(c('myhostname')),
'version' => $myversion,
'version-id' => $myversion_id,
'version-date' => $myversion_date,
'product' => $myproduct_name,
'protocol' => $lmtp?'LMTP':'ESMTP' }->{lc($1.$2)}
}xgse;
$self->smtp_resp(1,"220 $smtpd_greeting_banner_tmp");
section_time('SMTP greeting');
# each call to smtp_resp starts a $smtpd_timeout timeout to tame slow clients
$0 = sprintf("%s (ch%d-idle)",
c('myprogram_name'), $Amavis::child_invocation_count);
Amavis::Timing::go_idle(4);
local($_); local($/) = "\012"; # input line terminator set to LF
for ($! = 0; defined($_ = $self->readline); $! = 0) {
$0 = sprintf("%s (ch%d-%s)",
c('myprogram_name'), $Amavis::child_invocation_count, am_id());
Amavis::Timing::go_busy(5);
# the ball is now in our courtyard, (re)start our timer;
# each of our smtp responses will switch back to a $smtpd_timeout timer
{ # a block is used as a 'switch' statement - 'last' will exit from it
my $cmd = $_;
ll(4) && do_log(4, '%s< %s', $self->{proto},$cmd);
if (!/^ [ \t]* ( [A-Za-z] [A-Za-z0-9]* ) (?: [ \t]+ (.*?) )? [ \t]*
\015 \012 \z /xs) {
$self->smtp_resp(1,"500 5.5.2 Error: bad syntax", 1, $cmd); last;
};
$_ = uc($1); my $args = $2;
switch_to_my_time("rx SMTP $_");
# (causes holdups in Postfix, it doesn't retry immediately; better set max_use)
# $Amavis::child_task_count >= $max_requests # exceeded max_requests
# && /^(?:HELO|EHLO|LHLO|DATA|NOOP|QUIT|VRFY|EXPN|TURN)\z/ && do {
# # pipelining checkpoints;
# # in case of multiple-transaction protocols (e.g. SMTP, LMTP)
# # we do not like to keep running indefinitely at the MTA's mercy
# my $msg = "Closing transmission channel ".
# "after $Amavis::child_task_count transactions, $_";
# do_log(2,"%s",$msg); $self->smtp_resp(1,"421 4.3.0 ".$msg); #flush!
# $terminating=1; last;
# };
$tls_security_level && lc($tls_security_level) ne 'may' &&
!$self->{ssl_active} && !/^(?:NOOP|EHLO|STARTTLS|QUIT)\z/ && do {
$self->smtp_resp(1,"530 5.7.0 Must issue a STARTTLS command first",
1,$cmd);
last;
};
# lc($tls_security_level) eq 'verify' && !/^QUIT\z/ && do {
# $self->smtp_resp(1,"554 5.7.0 Command refused due to lack of security",
# 1,$cmd);
# last;
# };
/^NOOP\z/ && do { $self->smtp_resp(1,"250 2.0.0 Ok $_"); last }; #flush!
/^QUIT\z/ && do {
if ($args ne '') {
$self->smtp_resp(1,"501 5.5.4 Error: QUIT does not accept arguments",
1,$cmd); #flush
} else {
my $smtpd_quit_banner_tmp = c('smtpd_quit_banner');
$smtpd_quit_banner_tmp =~
s{ \$ (?: \{ ([^\}]+) \} |
([a-zA-Z](?:[a-zA-Z0-9_-]*[a-zA-Z0-9])?\b) ) }
{ { 'helo-name' => $myheloname,
'myhostname' => idn_to_ascii(c('myhostname')),
'version' => $myversion,
'version-id' => $myversion_id,
'version-date' => $myversion_date,
'product' => $myproduct_name,
'protocol' => $lmtp?'LMTP':'ESMTP' }->{lc($1.$2)}
}xgse;
$self->smtp_resp(1,"221 2.0.0 $smtpd_quit_banner_tmp"); #flush!
$terminating = 1;
}
last;
};
/^(?:RSET|HELO|EHLO|LHLO|STARTTLS)\z/ && do {
# explicit or implicit session reset
$sender_unq = $sender_quo = undef; @recips = (); $got_rcpt = 0;
undef $max_recip_size_limit; undef $msginfo; # forget previous
$final_oversized_destiny_all_pass = 1;
%current_policy_bank = %baseline_policy_bank; # restore bank settings
%xforward_args = ();
if (/^(?:RSET|STARTTLS)\z/ && $args ne '') {
$self->smtp_resp(1,"501 5.5.4 Error: $_ does not accept arguments",
1,$cmd);
} elsif (/^RSET\z/) {
$self->smtp_resp(0,"250 2.0.0 Ok $_");
} elsif (/^STARTTLS\z/) { # RFC 3207 (ex RFC 2487)
if ($self->{ssl_active}) {
$self->smtp_resp(1,"554 5.5.1 Error: TLS already active");
} elsif (!$tls_security_level) {
$self->smtp_resp(1,"502 5.5.1 Error: command not available");
# } elsif (!$announced_ehlo_keywords{'STARTTLS'}) {
# $self->smtp_resp(1,"502 5.5.1 Error: ".
# "service extension STARTTLS was not announced");
} else {
$self->smtp_resp(1,"220 2.0.0 Ready to start TLS"); #flush!
%announced_ehlo_keywords = ();
IO::Socket::SSL->start_SSL($sock,
SSL_server => 1,
SSL_hostname => idn_to_ascii(c('myhostname')),
SSL_error_trap => sub {
my($sock,$msg) = @_;
do_log(-2,"STARTTLS, upgrading socket to TLS failed: %s",$msg);
},
%smtpd_tls_server_options,
) or die "Error upgrading input socket to TLS: ".
IO::Socket::SSL::errstr();
if ($self->{smtp_inpbuf} ne '') {
do_log(-1, "STARTTLS pipelining violation attempt, sanitized");
$self->{smtp_inpbuf} = ''; # ditch any buffered data
}
$self->{ssl_active} = 1;
ll(3) && do_log(3,"smtpd TLS cipher: %s", $sock->get_cipher);
section_time('SMTP starttls');
}
} elsif (/^HELO\z/) {
$self->{pipelining} = 0; $lmtp = 0;
$conn->appl_proto($self->{proto} = 'SMTP');
$self->smtp_resp(0,"250 $myheloname");
$conn->smtp_helo($args); section_time('SMTP HELO');
} elsif (/^(?:EHLO|LHLO)\z/) {
$self->{pipelining} = 1; $lmtp = $_ eq 'LHLO' ? 1 : 0;
$conn->appl_proto($self->{proto} = $lmtp ? 'LMTP' : 'ESMTP');
my(@ehlo_keywords) = (
'VRFY',
'PIPELINING', # RFC 2920
!defined($message_size_limit) ? 'SIZE' # RFC 1870
: sprintf('SIZE %d',$message_size_limit),
'ENHANCEDSTATUSCODES', # RFC 2034, RFC 3463, RFC 5248
'8BITMIME', # RFC 6152
'SMTPUTF8', # RFC 6531
'DSN', # RFC 3461
!$tls_security_level || $self->{ssl_active} ? ()
: 'STARTTLS', # RFC 3207 (ex RFC 2487)
!@{ca('auth_mech_avail')} ? () # RFC 4954 (ex RFC 2554)
: join(' ','AUTH',@{ca('auth_mech_avail')}),
'XFORWARD NAME ADDR PORT PROTO HELO IDENT SOURCE',
# 'XCLIENT NAME ADDR PORT PROTO HELO LOGIN',
);
my(%smtpd_discard_ehlo_keywords) =
map((uc($_),1), @{ca('smtpd_discard_ehlo_keywords')});
# RFC 6531: Servers offering this extension MUST provide
# support for, and announce, the 8BITMIME extension
$smtpd_discard_ehlo_keywords{'SMTPUTF8'} = 1
if $smtpd_discard_ehlo_keywords{'8BITMIME'};
@ehlo_keywords =
grep(/^([A-Za-z0-9]+)/ &&
!$smtpd_discard_ehlo_keywords{uc $1}, @ehlo_keywords);
$self->smtp_resp(1,"250 $myheloname\n" .
join("\n",@ehlo_keywords)); #flush!
%announced_ehlo_keywords =
map( (/^([A-Za-z0-9]+)/ && uc $1, 1), @ehlo_keywords);
$conn->smtp_helo($args); section_time("SMTP $_");
};
last;
};
/^XFORWARD\z/ && do { # Postfix extension
my $xcmd = $_;
if (defined $sender_unq) {
$self->smtp_resp(1,"503 5.5.1 Error: $xcmd not allowed ".
"within transaction",1,$cmd);
last;
}
my $bad;
for (split(' ',$args)) {
if (!/^ ( [A-Za-z0-9] [A-Za-z0-9-]* ) =
( [\x21-\x7E\x80-\xFF]{0,255} )\z/xs) {
$self->smtp_resp(1,"501 5.5.4 Syntax error in $xcmd parameters",
1, $cmd);
$bad = 1; last;
} else {
my($name,$val) = (uc($1), $2);
if ($name=~/^(?:NAME|ADDR|PORT|PROTO|HELO|IDENT|SOURCE|LOGIN)\z/) {
$val = undef if uc($val) eq '[UNAVAILABLE]';
# Postfix since vers 2.3 (20060610) uses xtext-encoded (RFC 3461)
# strings in XCLIENT and XFORWARD attribute values, previous
# versions sent plain text with neutered special characters.
# The IDENT option is available since postfix 2.8.0 .
$val = xtext_decode($val) if defined $val &&
$val =~ /\+([0-9a-fA-F]{2})/;
$xforward_args{$name} = $val;
} else {
$self->smtp_resp(1,"501 5.5.4 $xcmd command parameter ".
"error: $name=$val",1,$cmd);
$bad = 1; last;
}
}
}
$self->smtp_resp(1,"250 2.5.0 Ok $_") if !$bad;
last;
};
/^HELP\z/ && do {
$self->smtp_resp(0,"214 2.0.0 See $myproduct_name home page at:\n".
"http://www.ijs.si/software/amavisd/");
last;
};
/^AUTH\z/ && @{ca('auth_mech_avail')} && do { # RFC 4954 (ex RFC 2554)
# if (!$announced_ehlo_keywords{'AUTH'}) {
# $self->smtp_resp(1,"502 5.5.1 Error: ".
# "service extension AUTH was not announced");
# last;
# } elsif
if ($args !~ /^([^ ]+)(?: ([^ ]*))?\z/is) {
$self->smtp_resp(1,"501 5.5.2 Syntax: AUTH mech [initresp]",1,$cmd);
last;
}
# enhanced status codes: RFC 4954, RFC 5248
my($auth_mech,$auth_resp) = (uc($1), $2);
if ($authenticated) {
$self->smtp_resp(1,"503 5.5.1 Error: session already authenticated",
1,$cmd);
} elsif (defined $sender_unq) {
$self->smtp_resp(1,"503 5.5.1 Error: AUTH not allowed within ".
"transaction",1,$cmd);
} elsif (!grep(uc($_) eq $auth_mech, @{ca('auth_mech_avail')})) {
$self->smtp_resp(1,"504 5.5.4 Error: requested authentication ".
"mechanism not supported",1,$cmd);
} else {
my($state,$result,$challenge);
if ($auth_resp eq '=') { $auth_resp = '' } # zero length
elsif ($auth_resp eq '') { $auth_resp = undef }
for (;;) {
if ($auth_resp !~ m{^[A-Za-z0-9+/]*=*\z}) {
$self->smtp_resp(1,"501 5.5.2 Authentication failed: ".
"malformed authentication response",1,$cmd);
last;
} else {
$auth_resp = decode_base64($auth_resp) if $auth_resp ne '';
($state,$result,$challenge) =
authenticate($state, $auth_mech, $auth_resp);
if (ref($result) eq 'ARRAY') {
$self->smtp_resp(0,"235 2.7.0 Authentication succeeded");
$authenticated = 1; ($auth_user,$auth_pass) = @$result;
do_log(2,"AUTH %s, user=%s", $auth_mech,$auth_user); #auth_resp
last;
} elsif (defined $result && !$result) {
$self->smtp_resp(0,"535 5.7.8 Authentication credentials ".
"invalid", 1, $cmd);
last;
}
}
# server challenge or ready prompt
$self->smtp_resp(1,"334 ".encode_base64($challenge,''));
$! = 0; $auth_resp = $self->readline;
defined $auth_resp or die "Error reading auth resp: ".
(!$self->{ssl_active} ? $! : $sock->errstr.", $!");
switch_to_my_time('rx AUTH challenge reply');
do_log(5, "%s< %s", $self->{proto},$auth_resp);
$auth_resp =~ s/\015?\012\z//;
if (length($auth_resp) > 12288) { # RFC 4954
$self->smtp_resp(1,"500 5.5.6 Authentication exchange ".
"line is too long");
last;
} elsif ($auth_resp eq '*') {
$self->smtp_resp(1,"501 5.7.1 Authentication aborted");
last;
}
}
}
last;
};
/^VRFY\z/ && do {
if ($args eq '') {
$self->smtp_resp(1,"501 5.5.2 Syntax: VRFY address", 1,$cmd); #flush!
} else { # RFC 2505
$self->smtp_resp(1,"252 2.0.0 Argument not checked", 0,$cmd); #flush!
}
last;
};
/^MAIL\z/ && do { # begin new SMTP transaction
if (defined $sender_unq) {
$self->smtp_resp(1,"503 5.5.1 Error: nested MAIL command", 1, $cmd);
last;
}
if (!$authenticated &&
c('auth_required_inp') && @{ca('auth_mech_avail')} ) {
$self->smtp_resp(1,"530 5.7.0 Authentication required", 1, $cmd);
last;
}
# begin SMTP transaction
my $now = Time::HiRes::time;
if (!$seq) { # the first connect
section_time('SMTP pre-MAIL');
} else { # establish a new time reference for each transaction
Amavis::Timing::init(); snmp_counters_init();
}
$seq++;
new_am_id(undef, $Amavis::child_invocation_count, $seq)
if !$initial_am_id;
$initial_am_id = 0;
# enter 'in transaction' state
$Amavis::zmq_obj->register_proc(1,1,'m',am_id()) if $Amavis::zmq_obj;
$Amavis::snmp_db->register_proc(1,1,'m',am_id()) if $Amavis::snmp_db;
Amavis::check_mail_begin_task();
$self->{tempdir}->prepare_dir;
$self->{tempdir}->prepare_file;
$msginfo = Amavis::In::Message->new;
$msginfo->rx_time($now);
$msginfo->log_id(am_id());
$msginfo->conn_obj($conn);
my $cl_ip = normalize_ip_addr($xforward_args{'ADDR'});
my $cl_port = $xforward_args{'PORT'};
my $cl_src = $xforward_args{'SOURCE'}; # local_header_rewrite_clients
my $cl_login= $xforward_args{'LOGIN'}; # XCLIENT
$cl_port = undef if $cl_port !~ /^\d{1,9}\z/ || $cl_port > 65535;
my(@bank_names_cl);
{ my $cl_ip_tmp = $cl_ip;
# treat unknown client IP address as 0.0.0.0,
# from "This" Network, RFC 1700
$cl_ip_tmp = '0.0.0.0' if !defined($cl_ip) || $cl_ip eq '';
my(@cp) = @{ca('client_ipaddr_policy')};
do_log(-1,'@client_ipaddr_policy must contain pairs, '.
'number of elements is not even') if @cp % 2 != 0;
my $labeler = Amavis::Lookup::Label->new('client_ipaddr_policy');
while (@cp > 1) {
my $lookup_table = shift(@cp);
my $policy_names = shift(@cp); # comma-separated string of names
next if !defined $policy_names;
if (lookup_ip_acl($cl_ip_tmp, $labeler, $lookup_table)) {
local $1;
push(@bank_names_cl,
map(/^\s*(\S.*?)\s*\z/s ? $1 : (), split(/,/, $policy_names)));
last; # should we stop here or not?
}
}
}
# load policy banks from the 'client_ipaddr_policy' lookup
Amavis::load_policy_bank($_,$msginfo) for @bank_names_cl;
$msginfo->originating(c('originating'));
$msginfo->client_addr($cl_ip); # ADDR
$msginfo->client_port($cl_port); # PORT
$msginfo->client_source($cl_src); # SOURCE
$msginfo->client_name($xforward_args{'NAME'});
$msginfo->client_helo($xforward_args{'HELO'});
$msginfo->client_proto($xforward_args{'PROTO'});
$msginfo->queue_id($xforward_args{'IDENT'});
# $msginfo->body_type('7BIT'); # presumed, unless explicitly declared
%xforward_args = (); # reset values for the next transaction
if ($self->{ssl_active}) {
$msginfo->tls_cipher($sock->get_cipher);
if ($self->{proto} =~ /^(LMTP|ESMTP)\z/i) {
$self->{proto} .= 'S'; # RFC 3848
$conn->appl_proto($self->{proto});
}
}
my $submitter;
if ($authenticated) {
$msginfo->auth_user($auth_user); $msginfo->auth_pass($auth_pass);
if ($self->{proto} =~ /^(LMTP|ESMTP)S?\z/i) {
$self->{proto} .= 'A'; # RFC 3848
$conn->appl_proto($self->{proto});
}
} elsif (c('auth_reauthenticate_forwarded') &&
c('amavis_auth_user') ne '') {
$msginfo->auth_user(c('amavis_auth_user'));
$msginfo->auth_pass(c('amavis_auth_pass'));
# $submitter = quote_rfc2821_local(c('mailfrom_notify_recip'));
# safe_encode_utf8_inplace($submitter) # to octets (if not already)
# $submitter = expand_variables($submitter) if defined $submitter;
}
local($1,$2);
if ($args !~ /^FROM: [ \t]*
( < (?: " (?: \\. | [^\\"] ){0,999} " | [^"\@ \t] )*
(?: \@ (?: \[ (?: \\. | [^\]\\] ){0,999} \] |
[^\[\]\\> \t] )* )? > )
(?: [ \t]+ (.+) )? \z/isx ) {
$self->smtp_resp(0,"501 5.5.2 Syntax: MAIL FROM:<address>",1,$cmd);
last;
}
my($addr,$opt) = ($1,$2);
my($size,$dsn_ret,$dsn_envid,$smtputf8);
my $msg; my $msg_nopenalize = 0;
for (split(' ',$opt)) {
if (!/^ ( [A-Za-z0-9] [A-Za-z0-9-]* )
(?: = ( [^=\000-\040\177]+ ) )? \z/xs) {
# any CHAR excluding "=", SP, and control characters
$msg = "501 5.5.4 Syntax error in MAIL FROM parameters";
} else {
my($name,$val) = (uc($1),$2);
if (!defined($val) && $name =~ /^(?:BODY|RET|ENVID|AUTH)\z/) {
$msg = "501 5.5.4 Syntax error in MAIL parameter, ".
"value is required: $name";
} elsif ($name eq 'SIZE') { # RFC 1870
if (!$announced_ehlo_keywords{'SIZE'}) {
do_log(5,'service extension SIZE was not announced');
# "555 5.5.4 Service extension SIZE was not announced: $name"
}
if (!defined $val) {
# value not provided, ignore
} elsif ($val !~ /^\d{1,20}\z/) {
$msg = "501 5.5.4 Syntax error in MAIL parameter: $name";
} else {
$size = untaint($val) if !defined $size;
}
} elsif ($name eq 'SMTPUTF8') { # RFC 6531
if (!$announced_ehlo_keywords{'SMTPUTF8'}) {
do_log(5,'service extension SMTPUTF8 was not announced');
# "555 5.5.4 Service extension SMTPUTF8 not announced: $name"
}
if (defined $val) {
# RFC 6531: The parameter does not accept a value.
$msg = "501 5.5.4 Syntax error in MAIL parameter: $name";
} else {
$msginfo->smtputf8(1);
if ($self->{proto} =~ /^(LMTP|ESMTP)S?A?\z/si) {
$self->{proto} = 'UTF8' . $self->{proto}; # RFC 6531
$self->{proto} =~ s/^UTF8ESMTP/UTF8SMTP/s;
$conn->appl_proto($self->{proto});
}
}
} elsif ($name eq 'BODY') { # RFC 6152: 8bit-MIMEtransport
if (!$announced_ehlo_keywords{'8BITMIME'}) {
do_log(5,'service extension 8BITMIME was not announced: BODY');
# "555 5.5.4 Service extension 8BITMIME not announced: $name"
}
if (defined $val && $val =~ /^(?:7BIT|8BITMIME)\z/i) {
$msginfo->body_type(uc $val);
} else {
$msg = "501 5.5.4 Syntax error in MAIL parameter: $name";
}
} elsif ($name eq 'RET') { # RFC 3461
if (!$announced_ehlo_keywords{'DSN'}) {
do_log(5,'service extension DSN was not announced: RET');
# "555 5.5.4 Service extension DSN not announced: $name"
}
if (!defined($dsn_ret)) {
$dsn_ret = uc $val;
} else {
$msg = "501 5.5.4 Syntax error in MAIL parameter: $name";
}
} elsif ($name eq 'ENVID') { # RFC 3461, value encoded as xtext
if (!$announced_ehlo_keywords{'DSN'}) {
do_log(5,'service extension DSN was not announced: ENVID');
# "555 5.5.4 Service extension DSN not announced: $name"
}
if (!defined($dsn_envid)) {
$dsn_envid = $val;
} else {
$msg = "501 5.5.4 Syntax error in MAIL parameter: $name";
}
} elsif ($name eq 'AUTH') { # RFC 4954 (ex RFC 2554)
if (!$announced_ehlo_keywords{'AUTH'}) {
do_log(5,'service extension AUTH was not announced');
# "555 5.5.4 Service extension AUTH not announced: $name"
}
my $s = xtext_decode($val); # encoded as xtext: RFC 3461
do_log(5,"MAIL command, %s, submitter: %s", $authenticated,$s);
if (defined $submitter) { # authorized identity
$msg = "504 5.5.4 MAIL command duplicate param.: $name=$val";
} elsif (!@{ca('auth_mech_avail')}) {
do_log(3,"MAIL command parameter AUTH supplied, but ".
"authentication capability not announced, ignored");
$submitter = '<>';
# mercifully ignore invalid parameter for the benefit of
# running amavisd as a Postfix pre-queue smtp proxy filter
# $msg = "503 5.7.4 Error: authentication disabled";
} else {
$submitter = $s;
}
} else {
$msg = "504 5.5.4 MAIL command parameter error: $name=$val";
}
}
last if defined $msg;
}
if (!defined($msg) && defined $dsn_ret && $dsn_ret!~/^(FULL|HDRS)\z/) {
$msg = "501 5.5.4 Syntax error in MAIL parameter RET: $dsn_ret";
}
if (!defined $msg) {
$sender_quo = $addr; $sender_unq = unquote_rfc2821_local($addr);
$addr = $1 if $addr =~ /^<(.*)>\z/s;
my $requoted = qquote_rfc2821_local($sender_unq);
do_log(2, "address modified (sender): %s -> %s",
$sender_quo, $requoted) if $requoted ne $sender_quo;
if (defined $policy_bank{'MYUSERS'} &&
$sender_unq ne '' && $msginfo->originating &&
lookup2(0,$sender_unq, ca('local_domains_maps'))) {
Amavis::load_policy_bank('MYUSERS',$msginfo);
}
debug_oneshot(
lookup2(0,$sender_unq, ca('debug_sender_maps')) ? 1 : 0,
$self->{proto} . "< $cmd");
# $submitter = $addr if !defined($submitter); # RFC 4954: MAY
$submitter = '<>' if !defined($msginfo->auth_user);
$msginfo->auth_submitter($submitter);
if (defined $size) {
do_log(5, "mesage size set to a declared size %s", $size);
$msginfo->msg_size(0+$size);
}
if (defined $dsn_ret || defined $dsn_envid) {
# keep ENVID in xtext-encoded form
$msginfo->dsn_ret($dsn_ret) if defined $dsn_ret;
$msginfo->dsn_envid($dsn_envid) if defined $dsn_envid;
}
$msg = "250 2.1.0 Sender $sender_quo OK";
};
$self->smtp_resp(0,$msg, !$msg_nopenalize && $msg=~/^5/ ? 1 : 0, $cmd);
section_time('SMTP MAIL');
last;
};
/^RCPT\z/ && do {
if (!defined($sender_unq)) {
$self->smtp_resp(1,"503 5.5.1 Need MAIL command before RCPT",1,$cmd);
@recips = (); $got_rcpt = 0;
last;
}
$got_rcpt++;
local($1,$2);
if ($args !~ /^TO: [ \t]*
( < (?: " (?: \\. | [^\\"] ){0,999} " | [^"\@ \t] )*
(?: \@ (?: \[ (?: \\. | [^\]\\] ){0,999} \] |
[^\[\]\\> \t] )* )? > )
(?: [ \t]+ (.+) )? \z/isx ) {
$self->smtp_resp(0,"501 5.5.2 Syntax: RCPT TO:<address>",1,$cmd);
last;
}
my($addr_smtp,$opt) = ($1,$2);
my($notify,$orcpt);
my $msg; my $msg_nopenalize = 0;
for (split(' ',$opt)) {
if (!/^ ( [A-Za-z0-9] [A-Za-z0-9-]* )
(?: = ( [^=\000-\040\177]+ ) )? \z/xs) {
# any CHAR excluding "=", SP, and control characters
$msg = "501 5.5.4 Syntax error in RCPT parameters";
} else {
my($name,$val) = (uc($1),$2);
if (!defined($val) && $name =~ /^(?:NOTIFY|ORCPT)\z/) {
$msg = "501 5.5.4 Syntax error in RCPT parameter, ".
"value is required: $name";
} elsif ($name eq 'NOTIFY') { # RFC 3461
if (!$announced_ehlo_keywords{'DSN'}) {
do_log(5,'service extension DSN was not announced: NOTIFY');
# "555 5.5.4 Service extension DSN not announced: $name"
}
if (!defined($notify)) {
$notify = $val;
} else {
$msg = "501 5.5.4 Syntax error in RCPT parameter $name";
}
} elsif ($name eq 'ORCPT') {
# RFC 3461: value encoded as xtext
# RFC 6533: utf-8-addr-xtext, utf-8-addr-unitext, utf-8-address
if (!$announced_ehlo_keywords{'DSN'}) {
do_log(5,'service extension DSN was not announced: ORCPT');
# "555 5.5.4 Service extension DSN not announced: $name"
}
if (defined $orcpt) { # duplicate
$msg = "501 5.5.4 Syntax error in RCPT parameter $name";
} else {
my($addr_type, $orcpt_dec) =
orcpt_decode($val, $msginfo->smtputf8);
$orcpt = $addr_type . ';' . $orcpt_dec;
}
} else {
$msg = "555 5.5.4 RCPT command parameter unrecognized: $name";
# 504 5.5.4 RCPT command parameter not implemented:
# 504 5.5.4 RCPT command parameter error:
# 555 5.5.4 RCPT command parameter unrecognized:
}
}
last if defined $msg;
}
my $addr = unquote_rfc2821_local($addr_smtp);
my $requoted = qquote_rfc2821_local($addr);
if ($requoted ne $addr_smtp) { # check for valid canonical quoting
# RFC 3461: If no ORCPT parameter was present in the RCPT command
# when the message was received, an ORCPT parameter MAY be added
# to the RCPT command when the message is relayed. If an ORCPT
# parameter is added by the relaying MTA, it MUST contain the
# recipient address from the RCPT command used when the message
# was received by that MTA
if (defined $orcpt) {
do_log(2, "address modified (recip): %s -> %s, orcpt retained: %s",
$addr_smtp, $requoted, $orcpt);
} else {
do_log(2, "address modified (recip): %s -> %s, setting orcpt",
$addr_smtp, $requoted);
$orcpt = ';' . $addr_smtp;
}
}
if (lookup2(0,$addr, ca('debug_recipient_maps'))) {
debug_oneshot(1, $self->{proto} . "< $cmd");
}
my $mslm = ca('message_size_limit_maps');
my $recip_size_limit;
$recip_size_limit = lookup2(0,$addr,$mslm) if @$mslm;
if ($recip_size_limit) {
# RFC 5321 requires at least 64k
$recip_size_limit = 65536
if $recip_size_limit < 65536 &&
$enforce_smtpd_message_size_limit_64kb_min;
$max_recip_size_limit = $recip_size_limit
if $recip_size_limit > $max_recip_size_limit;
}
my $mail_size = $msginfo->msg_size;
if (!defined($msg) && defined($notify)) {
my(@v) = split(/,/,uc($notify),-1);
if (grep(!/^(?:NEVER|SUCCESS|FAILURE|DELAY)\z/, @v)) {
$msg = "501 5.5.4 Error in RCPT parameter NOTIFY, ".
"illegal value: $notify";
} elsif (grep($_ eq 'NEVER', @v) && grep($_ ne 'NEVER', @v)) {
$msg = "501 5.5.4 Error in RCPT parameter NOTIFY, ".
"illegal combination of values: $notify";
} elsif (!@v) {
$msg = "501 5.5.4 Error in RCPT parameter NOTIFY, ".
"missing value: $notify";
}
$notify = \@v; # replace a string with a listref of items
}
if (!defined($msg) && $recip_size_limit) {
# check mail size if known, update $final_oversized_destiny_all_pass
my $fd = !ref $oversized_fd_map_ref ? $oversized_fd_map_ref # compat
: lookup2(0, $addr, $oversized_fd_map_ref, Label => 'Destiny4');
if (!defined $fd || $fd == D_PASS) {
$fd = D_PASS; # keep D_PASS
} elsif (defined($oversized_lovers_map_ref) &&
lookup2(0, $addr, $oversized_lovers_map_ref,
Label => 'Lovers4')) {
$fd = D_PASS; # D_PASS for oversized lovers
} else { # $fd != D_PASS, blocked if oversized
if ($final_oversized_destiny_all_pass) {
$final_oversized_destiny_all_pass = 0; # not PASS for all recips
do_log(5, 'Not a D_PASS on oversized for all recips: %s', $addr);
}
}
# check declared mail size here if known, otherwise we'll check
# the actual mail size after the message is received
if (defined $mail_size && $mail_size > $recip_size_limit) {
$msg = $fd == D_TEMPFAIL ? '452 4.3.4' :
$fd == D_PASS ? '250 2.3.4' : '552 5.3.4';
$msg .= " Declared message size ($mail_size B) ".
"exceeds size limit for recipient $addr_smtp";
$msg_nopenalize = 1;
do_log(0, "%s %s 'RCPT TO': %s", $self->{proto},
$fd == D_TEMPFAIL ? 'TEMPFAIL' :
$fd == D_PASS ? 'PASS' : 'REJECT',
$msg);
}
}
if (!defined($msg) && $got_rcpt > $smtpd_recipient_limit) {
$msg = "452 4.5.3 Too many recipients";
}
if (!defined $msg) {
$msg = "250 2.1.5 Recipient $addr_smtp OK";
}
if ($msg =~ /^2/) {
my $recip_obj = Amavis::In::Message::PerRecip->new;
$recip_obj->recip_addr($addr);
$recip_obj->recip_addr_smtp($addr_smtp);
$recip_obj->recip_destiny(D_PASS); # default is Pass
$recip_obj->dsn_notify($notify) if defined $notify;
$recip_obj->dsn_orcpt($orcpt) if defined $orcpt;
push(@recips,$recip_obj);
}
$self->smtp_resp(0,$msg, !$msg_nopenalize && $msg=~/^5/ ? 1 : 0, $cmd);
last;
};
/^DATA\z/ && $args ne '' && do {
$self->smtp_resp(1,"501 5.5.4 Error: DATA does not accept arguments",
1,$cmd); #flush
last;
};
/^DATA\z/ && !@recips && do {
if (!defined($sender_unq)) {
$self->smtp_resp(1,"503 5.5.1 Need MAIL command before DATA",1,$cmd);
} elsif (!$got_rcpt) {
$self->smtp_resp(1,"503 5.5.1 Need RCPT command before DATA",1,$cmd);
} elsif ($lmtp) { # RFC 2033 requires 503 code!
$self->smtp_resp(1,"503 5.1.1 Error (DATA): no valid recipients",
0,$cmd); #flush!
} else {
$self->smtp_resp(1,"554 5.1.1 Error (DATA): no valid recipients",
0,$cmd); #flush!
}
last;
};
# /^DATA\z/ && uc($msginfo->body_type) eq "BINARYMIME" && do { # RFC 3030
# $self->smtp_resp(1,"503 5.5.1 DATA is incompatible with BINARYMIME",
# 0,$cmd); #flush!
# last;
# };
/^DATA\z/ && do {
# set timer to the initial value, MTA timer starts here
if ($message_size_limit) { # enforce system-wide size limit
if (!$max_recip_size_limit ||
$max_recip_size_limit > $message_size_limit) {
$max_recip_size_limit = $message_size_limit;
}
}
my $size = 0; my $oversized = 0; my $eval_stat; my $complete;
# preallocate some storage
my $out_str = ''; vec($out_str,65536,8) = 0; $out_str = '';
eval {
$msginfo->sender($sender_unq); $msginfo->sender_smtp($sender_quo);
$msginfo->per_recip_data(\@recips);
ll(1) && do_log(1, "%s %s:%s %s: %s -> %s%s Received: %s",
$conn->appl_proto,
!ref $inet_socket_bind && $conn->socket_ip eq $inet_socket_bind
? '' : '['.$conn->socket_ip.']',
$conn->socket_port, $self->{tempdir}->path,
$sender_quo,
join(',', map($_->recip_addr_smtp, @{$msginfo->per_recip_data})),
join('',
!defined $msginfo->msg_size ? () : # RFC 1870
' SIZE='.$msginfo->msg_size,
!defined $msginfo->body_type ? () : ' BODY='.$msginfo->body_type,
!$msginfo->smtputf8 ? () : ' SMTPUTF8',
!defined $msginfo->dsn_ret ? () : ' RET='.$msginfo->dsn_ret,
!defined $msginfo->dsn_envid ? () :
' ENVID='.xtext_decode($msginfo->dsn_envid),
!defined $msginfo->auth_submitter ||
$msginfo->auth_submitter eq '<>' ? () :
' AUTH='.$msginfo->auth_submitter,
),
make_received_header_field($msginfo,0) );
# pipelining checkpoint
$self->smtp_resp(1,"354 End data with <CR><LF>.<CR><LF>"); #flush!
$self->{within_data_transfer} = 1;
# data transferring state
$Amavis::zmq_obj->register_proc(2,0,'d',am_id()) if $Amavis::zmq_obj;
$Amavis::snmp_db->register_proc(2,0,'d',am_id()) if $Amavis::snmp_db;
section_time('SMTP pre-DATA-flush') if $self->{pipelining};
$self->{tempdir}->empty(0); # mark the mail file as non-empty
switch_to_client_time('receiving data');
my $fh = $self->{tempdir}->fh;
# the copy_smtp_data() will use syswrite, flush buffer just in case
if ($fh) { $fh->flush or die "Can't flush mail file: $!" }
if (!$max_recip_size_limit || $final_oversized_destiny_all_pass) {
# no message size limit enforced, faster
($size,$oversized) = $self->copy_smtp_data($fh, \$out_str, undef);
} else { # enforce size limit
do_log(5,"enforcing size limit %s during DATA",
$max_recip_size_limit);
($size,$oversized) = $self->copy_smtp_data($fh, \$out_str,
$max_recip_size_limit);
};
switch_to_my_time('rx data-end');
$complete = !$self->{within_data_transfer};
$eof = 1 if !$complete;
# normal data termination, eof on socket, timeout, fatal error
do_log(4, "%s< .<CR><LF>", $self->{proto}) if $complete;
if ($fh) {
$fh->flush or die "Can't flush mail file: $!";
# On some systems you have to do a seek whenever you
# switch between reading and writing. Among other things,
# this may have the effect of calling stdio's clearerr(3).
$fh->seek(0,1) or die "Can't seek on file: $!";
}
section_time('SMTP DATA');
1;
} or do { # end eval
$eval_stat = $@ ne '' ? $@ : "errno=$!";
};
if ( defined $eval_stat || !$complete || # err or connection broken
($oversized && !$final_oversized_destiny_all_pass) ) {
chomp $eval_stat if defined $eval_stat;
# on error, either send: '421 Shutting down',
# or: '451 Aborted, error in processing' and NOT shut down!
if ($oversized && !defined $eval_stat &&
!$self->{within_data_transfer}) {
my $msg = "552 5.3.4 Message size ($size B) exceeds size limit";
do_log(0, "%s REJECT: %s", $self->{proto},$msg);
$self->smtp_resp(1,$msg, 0,$cmd);
} elsif (!$self->{within_data_transfer}) {
my $msg = 'Error in processing: ' .
(defined $eval_stat ? $eval_stat
: !$complete ? 'incomplete' : '(no error?)');
do_log(-2, "%s TROUBLE: 451 4.5.0 %s", $self->{proto},$msg);
$self->smtp_resp(1,"451 4.5.0 $msg");
### $aborting = $msg;
} else {
$aborting = "Connection broken during data transfer" if $eof;
$aborting .= ', ' if $aborting ne '' && defined $eval_stat;
$aborting .= $eval_stat if defined $eval_stat;
$aborting .= " during waiting for input from client"
if defined $eval_stat && $eval_stat =~ /^timed out\b/
&& waiting_for_client();
$aborting = '???' if $aborting eq '';
do_log(defined $eval_stat ? -1 : 3,
"%s ABORTING: %s", $self->{proto}, $aborting);
}
} else { # all OK
# According to RFC 1047 it is not a good idea to do lengthy
# processing here, but we do not have much choice, amavis has no
# queuing mechanism and cannot accept responsibility for delivery.
#
# check contents before responding
# check_mail() expects an open file handle in $msginfo->mail_text,
# need not be rewound
$msginfo->mail_tempdir($self->{tempdir}->path);
$msginfo->mail_text_fn($self->{tempdir}->path . '/email.txt');
$msginfo->mail_text($self->{tempdir}->fh);
$msginfo->mail_text_str(\$out_str) if defined $out_str &&
$out_str ne '';
#
# RFC 1870: The message size is defined as the number of octets,
# including CR-LF pairs, but not counting the SMTP DATA command's
# terminating dot or doubled (stuffing) dots
my $declared_size = $msginfo->msg_size; # RFC 1870
if (!defined($declared_size)) {
do_log(5, "message size set to %s", $size);
} elsif ($size > $declared_size) { # shouldn't happen with decent MTA
do_log(4,"Actual message size %s B greater than the ".
"declared %s B", $size,$declared_size);
} elsif ($size < $declared_size) { # not unusual, but permitted
do_log(4,"Actual message size %d B less than the declared %d B",
$size,$declared_size);
}
$msginfo->msg_size(untaint($size)); # store actual RFC 1870 mail size
# some fatal errors are not catchable by eval (like exceeding virtual
# memory), but may still allow processing to continue in a DESTROY or
# END method; turn on trouble flag here to allow DESTROY to deal with
# such a case correctly, then clear the flag after content checking
# if everything turned out well
$self->{tempdir}->preserve(1);
my($smtp_resp, $exit_code, $preserve_evidence) =
&$check_mail($msginfo,$lmtp); # do all the contents checking
$self->{tempdir}->preserve(0) if !$preserve_evidence; # clear if ok
prolong_timer('check done');
if ($smtp_resp =~ /^4/) {
# ok, not-done recipients are to be expected, do not check
} elsif (grep(!$_->recip_done && $_->delivery_method ne '',
@{$msginfo->per_recip_data})) {
die "TROUBLE: (MISCONFIG?) not all recipients done";
} elsif (grep(!$_->recip_done && $_->delivery_method eq '',
@{$msginfo->per_recip_data})) {
die "NOT ALL RECIPIENTS DONE, EMPTY DELIVERY_METHOD!";
# do_log(0, "NOT ALL RECIPIENTS DONE, EMPTY DELIVERY_METHOD!");
}
section_time('SMTP pre-response');
if (!$lmtp) { # smtp
do_log(3, 'sending SMTP response: "%s"', $smtp_resp);
$self->smtp_resp(0, $smtp_resp);
} else { # lmtp
my $bounced = $msginfo->dsn_sent; # 1=bounced, 2=suppressed
for my $r (@{$msginfo->per_recip_data}) {
my $resp = $r->recip_smtp_response;
my $recip_quoted = $r->recip_addr_smtp;
if ($resp=~/^[24]/) {
# success or tempfail, no need to change status
} elsif ($bounced && $bounced == 1) { # genuine bounce
# a non-delivery notifications was already sent by us, so
# MTA must not bounce it again; turn status into a success
$resp = sprintf("250 2.5.0 Ok %s, DSN was sent (%s)",
$recip_quoted, $resp);
} elsif ($bounced) { # fake bounce - bounce was suppressed
$resp = sprintf("250 2.5.0 Ok %s, DSN suppressed (%s)",
$recip_quoted, $resp);
} elsif ($resp=~/^5/ && $r->recip_destiny != D_REJECT) {
# just in case, if the bounce suppression scheme did not work
$resp = sprintf("250 2.5.0 Ok %s, DSN suppressed_2 (%s)",
$recip_quoted, $resp);
}
do_log(3, 'LMTP response for %s: "%s"', $recip_quoted, $resp);
$self->smtp_resp(0, $resp);
}
}
$self->smtp_resp_flush; # optional, but nice to report timing right
section_time('SMTP response');
}; # end all OK
$self->{tempdir}->clean;
my $msg_size = $msginfo->msg_size;
my $sa_rusage = $msginfo->supplementary_info('RUSAGE-SA');
$sender_unq = $sender_quo = undef; @recips = (); $got_rcpt = 0;
undef $max_recip_size_limit; undef $msginfo; # forget previous
$final_oversized_destiny_all_pass = 1;
%xforward_args = ();
section_time('dump_captured_log') if log_capture_enabled();
dump_captured_log(1, c('enable_log_capture_dump'));
%current_policy_bank = %baseline_policy_bank; # restore bank settings
# report elapsed times by section for each transaction
# (the time for a QUIT remains unaccounted for)
if (ll(2)) {
my $am_rusage_report = Amavis::Timing::rusage_report();
my $am_timing_report = Amavis::Timing::report();
if ($sa_rusage && @$sa_rusage) {
local $1; my $sa_cpu_sum = 0; $sa_cpu_sum += $_ for @$sa_rusage;
$am_timing_report =~ # ugly hack
s{\bcpu ([0-9.]+) ms\]}
{sprintf("cpu %s ms, AM-cpu %.0f ms, SA-cpu %.0f ms]",
$1, $1 - $sa_cpu_sum*1000, $sa_cpu_sum*1000) }se;
}
do_log(2,"size: %d, %s", $msg_size, $am_timing_report);
do_log(2,"size: %d, RUSAGE %s", $msg_size, $am_rusage_report)
if defined $am_rusage_report;
}
Amavis::Timing::init(); snmp_counters_init();
$Amavis::last_task_completed_at = Time::HiRes::time;
last;
}; # DATA
/^(?:EXPN|TURN|ETRN|SEND|SOML|SAML)\z/ && do {
$self->smtp_resp(1,"502 5.5.1 Error: command $_ not implemented",
0,$cmd);
last;
};
# catchall (unknown commands): #flush!
$self->smtp_resp(1,"500 5.5.2 Error: command $_ not recognized", 1,$cmd);
}; # end of 'switch' block
if ($terminating || defined $aborting) { # exit SMTP-session loop
$voluntary_exit = 1; last;
}
# don't bother, just flush any responses regardless of pending input;
# this also keeps us on the safe side when a Postfix pre-queue setup
# turns HELO into EHLO sessions and smtpd_proxy_options=speed_adjust
# is not in use
$self->smtp_resp_flush;
#
# if ($self->{smtp_outbuf} && @{$self->{smtp_outbuf}} &&
# $self->{pipelining}) {
# # RFC 2920 requires a flush whenever a local TCP input buffer is emptied
# my $fd_sock = fileno($sock);
# my $rout; my $rin = ''; vec($rin,$fd_sock,1) = 1;
# my($nfound, $timeleft) = select($rout=$rin, undef, undef, 0);
# if (defined $nfound && $nfound > 0 && vec($rout, $fd_sock, 1)) {
# # input is available, do not bother flushing output yet
# do_log(2,"pipelining in effect, input available, flush delayed");
# } else {
# $self->smtp_resp_flush;
# }
# }
$0 = sprintf("%s (ch%d-%s-idle)",
c('myprogram_name'), $Amavis::child_invocation_count, am_id());
Amavis::Timing::go_idle(6);
} # end of loop
my($errn,$errs);
if (!$voluntary_exit) {
$eof = 1;
if (!defined($_)) {
$errn = 0+$!;
$errs = !$self->{ssl_active} ? "$!" : $sock->errstr.", $!";
}
}
# come here when: QUIT is received, eof or err on socket, or we need to abort
$0 = sprintf("%s (ch%d)",
c('myprogram_name'), $Amavis::child_invocation_count);
alarm(0); do_log(4,"SMTP session over, timer stopped");
Amavis::Timing::go_busy(7);
# flush just in case, session might have been disconnected
eval {
$self->smtp_resp_flush; 1;
} or do {
my $eval_stat = $@ ne '' ? $@ : "errno=$!"; chomp $eval_stat;
do_log(1, "flush failed: %s", $eval_stat);
};
my $msg =
defined $aborting && !$eof ? "ABORTING the session: $aborting" :
defined $aborting ? $aborting :
!$terminating ? "client broke the connection without a QUIT ($errs)" : '';
if ($msg eq '') {
# ok
} elsif ($aborting) {
do_log(-1, "%s: NOTICE: %s", $self->{proto},$msg);
} else {
do_log( 3, "%s: notice: %s", $self->{proto},$msg);
}
if (defined $aborting && !$eof)
{ $self->smtp_resp(1,"421 4.3.2 Service shutting down, ".$aborting) }
$self->{session_closed_normally} = 1;
# Net::Server closes connection after child_finish_hook
}
# sends an SMTP response consisting of a 3-digit code and an optional message;
# slow down evil clients by delaying response on permanent errors
#
sub smtp_resp($$$;$$) {
my($self, $flush,$resp, $penalize,$line) = @_;
if ($penalize) { # PENALIZE syntax errors?
do_log(0, "%s: %s; smtp_resp: %s", $self->{proto},$resp,$line);
# sleep 1;
# section_time('SMTP penalty wait');
}
push(@{$self->{smtp_outbuf}}, @{wrap_smtp_resp(sanitize_str($resp,1))});
$self->smtp_resp_flush if $flush || !$self->{pipelining} ||
@{$self->{smtp_outbuf}} > 200;
}
sub smtp_resp_flush($) {
my $self = $_[0];
my $outbuf_ref = $self->{smtp_outbuf};
if ($outbuf_ref && @$outbuf_ref) {
if (ll(4)) { do_log(4, "%s> %s", $self->{proto}, $_) for @$outbuf_ref }
my $sock = $self->{sock};
my $stat = $sock->print(join('', map($_."\015\012", @$outbuf_ref)));
@$outbuf_ref = (); # prevent printing again even if error
$stat or die "Error writing an SMTP response to the socket: ".
(!$self->{ssl_active} ? $! : $sock->errstr.", $!");
$sock->flush or die "Error flushing an SMTP response to the socket: ".
(!$self->{ssl_active} ? $! : $sock->errstr.", $!");
# put a ball in client's courtyard, start his timer
switch_to_client_time('smtp response sent');
}
}
1;